I am trying to make a game with SpriteKit where the main character shoots a 'rope' and swings through the level (Think spiderman-ish). I have no problem making the rope and having it attached to the player and different sprites but I don't really know how to go about the 'shooting' part.
My current rope is built similar to this (https://www.youtube.com/watch?v=7jWdcbmnmKQ&hd=1) where I have several separate parts connected using SKPhysicsJointPin. I have tried several different approaches to shoot the rope, both with applyImpulse/Force and SKActions, but none works smoothly.
To sum it up:
- What is best practice for creating a rope that can extend in a specific direction?
I'm fine with just general pointers in the right direction since this is all to learn and I don't think I really need completed code for it.
General pointer:
Shoot a physics body in the way you need it to "fly" (the bullet)
In didSimulatePhysics assign the bullet's position to the rope's first node
In theory this should extend the rope while shooting, without affecting the trajectory of the bullet.
You may need to add more rope segments as the distance between the bullet and the weapon/player increases, otherwise the rope may be huddled too tightly together at the start of the bullet's flight path, causing physics to behave unexpectedly. Though adding rope segments in-flight may cause issues in its own right.
One solution could be to disable physics for the rope until a certain distance has been reached or the bullet "hit" something. Until then the rope could be considered a straight line and rope segment nodes positioned accordingly along a straight line between bullet and weapon.
Instead of using the physics engine to move your extending rope (applyImpulse), try moving the rope's end in a straight line at a fixed speed until it hits a target. Just a thought!
Related
I am currently working on a 2D endless runner, written in Swift3 and using Spritekit.
Short question:
Is there a way to only check for collisions on the right side of my character's rectangular physics body?
More info:
The platform on which the character runs is made of puzzle pieces and the user builds upon it as the game progresses. The character progresses left to right, in respect to the background (which goes right to left).
I want the character to automatically jump when he collides with a piece on his right side. However, any pieces that the player puts to the right of him (same Y value as the character) is of the same class as the pieces underneath him.
So the same code that checks for collision between the character and pieces to his right, and make him jump, will also make him jump as long as the game detects collision between the character and the pieces under him.
I have not been able to find another problem like mine, since usually others' characters are colliding with objects of different classes from their ground class.
Thanks!
P.S. I have tried to make my character a SKSpriteNode with two physics bodies, but I could not find any helpful documentation. If it helps any, my character also performs a looping running animation--though I can't imagine that would harm anything.
You could achieve that by detecting collisions with your rectangle and then deciding whether the collision was with the side of your interest or not. Here is a discussion about how to do that. Good luck!
Have you tried adding a non visible sub node (e.g. feetNode) to your character's sprite node and giving that sub node the physics body (class) for floor contact ?
Depending on the rest of your logic, it may allow you to use a different physics class for your character have more flexibility in collision detection.
In fact, you could probably use that approach with several sub nodes in your character's sprite node and have multiple collision behaviours for the character depending on what hits it.
Once you obtain the contact point of the 2 bodies that are colliding, determine which body is the one that is colliding by checking the categorymasks and then check its CGPoints x position. This x position can be compared to the other body's x position to know exactly which side it is colliding from.
if Body A's x position > Body B's x position, Body A is on the right and if not, its on the left.
As simple as that.
Hope this helps!
I have a sprite hanging from a rope in SpriteKit. I have the rope pinned to an object I'd like to slide back and fourth (to simulate the rope being attached to a track or conveyor belt). Imagine clothes hanging on the revolving rack of a dry cleaners store. Similar to that!
Anyway, I can't figure out the proper way to move my rope as if it its connected to the track.
Pinning the rope to another (track) object and moving that track object doesn't seem to work. I can't apply move actions to a sprite that has physics (without the simulation getting all messed up).
I've also tried adjusting the track objects velocity directly to (2,0) in the update method (Including all the other update callbacks SpriteKit surfaces). The only problem is the weight of the rope and attached object eventually pull the track object down. I think this happens because didSimulatePhysics happens no matter what.
Any suggestions on how to move my sprite on a rope along a track?
Thanks in advance!
I have made a game using SpriteKit and Swift 3 and have figured out all aspects of the game except the speed of the ball node in the game. Im confused with the different function applyImpulse() and ball.physicsBody.velocity, as I have tested both and don't seem to really understand what the speed I'm actually programatically settings is. Any clarification on what I should be using would be great?
Also whilst testing (by printing the ball's velocity to the console every collision) I would see sometimes the ball's speed would simply go to some long and random decimal value when it hit other nodes such as a paddle which I hadn't specifically coded anything to happen with the ball's speed in the case of a collision with it.
In summary I would appreciate:
Just general clarification regarding speed of the ball in SpriteKit and how I should approach it (what method/function I should use)
How I would make it so the ball's speed doesn't got to these very long random decimals
Thanks
In regards to the values, there is not really a set rule of what the values are for impulses and forces. It depends on how big your sprites physics body are etc. An impulse of 80 might be a perfect jump value for 1 sprite size, but than make it half the size and that 80 is suddenly way to high. There are also factors such as gravity, mass etc than can have an effect on this.
So you usually just play around with the values until you get the desired result.
In regards to the collision with the paddle, you need to check your bit mask values and your dynamic properties. SpriteKit by default sets collisions to all objects, so if you dont specifically tell your paddle/ball to ignore each other they will collide.
There are also things such as restitution, friction, damping etc that can have an effect on how you sprites behave when colliding.
There are loads of tutorials on google about SpritKit physic/collisions or read the apple documentation.
In regards to the difference between velocity and impulses/forces, as per apples documentation
"First, you can control a physics body’s velocity directly, by setting its velocity and angularVelocity properties. As with many other properties, you often set these properties once when the physics body is first created and then let the physics simulation adjust them as necessary. For example, assume for a moment you are making a space-based game where a rocket ship can fire missiles. When the ship fires a missile, the missile should have a starting velocity of the ship plus an additional vector in the direction of the launch.
When a body is in the simulation, it is more common for the velocity to be adjusted based on forces applied to the body. Another source of velocity changes, collisions, is discussed later."
https://developer.apple.com/library/content/documentation/GraphicsAnimation/Conceptual/SpriteKit_PG/Physics/Physics.html
So basically the general rule of thumb is this:
1) Only set the velocity property when you create the physics body. I never needed to do this for my games yet.
The only time I really use the velocity property is for things such as double jumping where I need to set it to 0 to have a consistent double jump
...velocity.dy = 0
...applyImpulse(
2) When you are playing the game already than
a) If you are trying to continuously move your ball you should use
applyForce...
in something like the update method of your SKScene.
b) If you want to make your ball jump, so basically a short 1 time thing, you should use
applyImpulse...
Hope this helps
I have a ship that everything is centered around and everything moves relative to it. It is a first person shooter. Right now when I fire, and the ship speeds up, it catches up to the bullets. I would like the physics world to move relative to the ship's speed so that the bullet is essentially unaffected by ship speed.
The physics engine is doing the right thing, but not the right thing for my game.
I have other elements that move relative to the ship as it moves, which move correctly now, so don't want make ship stationary and move everything else in world around it. I don't see a direct way to do this maybe there is an indirect way? Perhaps I can manually take over the positioning of the bullets. I would like to use the other parts of the physics engine for doing collisions etc so don't want to completely manually do it, but will if that is the only option.
Anyone else have any suggestions?
It sounds like your bullets are receiving air friction. This is controlled by the physics bodies "damping" property. A value of 1.0 will make it static without movement. A value of 0 will allow it to move continuously without ever stoping. The default value is 0.1 as per the Apple documents. Assign your node like so to remove the damping(air friction)...
yourNode.physicsBody.damping = 0
I'm working on a game in which the user should be able to trigger 'rods' that come out from the edge of the screen to displace elements on screen (balls). These projectiles roughly resemble pool-cues. Or perhaps pinball plungers, except that they start from the 'loaded' position (mostly offscreen), and when triggered, they eject out, then quickly retreat.
I'm unclear how I should build these with Sprite Kit.
The game uses the PhysicsEngine, and the onscreen balls should be effected both by gravity AND they should be displaced when they collide with the rods. However the rods should neither be effected by gravity, not displaced when they collide with the balls -- they should simply retreat regardless of whether they've made contact with the balls.
I realize I can set the affectedByGravity property for the rods. However because they will still displace slightly when they collide with the balls. How can I 'fix' or 'peg' them in place? Do I need to use an SKPhysicsSlidingJoint? If so, has anyone encountered any examples online? Is there a simpler way to do this?
A related physics engine, Box2D distinguishes static, kinematic, and dynamic bodies.
Kinematic bodies can move and will collide with other objects, but they are themselves not affected by dynamic bodies or forces like gravity. Thus, consider setting rod.dynamic = NO; but animate it with actions. See also here in the reference for SKPhysicsBody.