I am currently using xcode 5.1
I have successfully changed an app's name before using the same steps described this SO Question.
But for some reason I am having trouble right now. Usually, I have experienced this same screen. but this time when I changed the name it did not fully change everything.
When I view my project's targets, the old app name is still being used. If I clean and build my project, it will show the old name very quickly in the "progress bar" up at the top of xcode.
If I look at my project's supporting files folder, the plist still has the old app name ie. old-app-name-Info.plist
So far I have manually changed the project name, changed the bundle identifier, changed the Product Name in the Build Settings, and changed the name of the Scheme. I don't know what else to do.
The app now has the correct name when I run it on the simulator or on my iPhone, but the old app name is still being used throughout various areas in project folder's, xcode settings, etc.
I just want to fully change everything that use's the old app's name and make them use the new app name.
EDIT: Here's another example. If I go to the File Inspector tab the correct name is shown for the project, but if I go to the Issue Navigator tab it shows the old app name at the very top.
What do I need to do to change everything over?
This ended up finally changing it for me.
I went to the Project Navigator tab in xcode and clicked on my project. I then double clicked the target that still had the old app name, changed the name to the new app name, and hit the return key.
Everything is now correct and changed to the new app name. However, I still have no idea why the SO Answer that I linked to in my question did not get the job done in the first place.
I have used that solution several times over the past 6 months and it has always worked perfectly for me so I have no idea why it did not work this time.
Open your plist file and edit bundle name and bundle display name as you want.
This should do the trick.
Simply if you want to change the application name on devices go to the info.plist file on your application and Change Bundle Name to (yourAppName)
That's work for me. (XCode 6.3.2)
I have a working app in Xcode, however when I try to build and run it the simulator displays an older version of the storyboard I was working on. I had changed some of the design on the storyboard but this does not reflect in the simulator, nothing is updated.
Does anyone have any ideas?
Delete the App on the simulator.
Clean
List item
Build & Run
Use NSLog(#"") in your controller to check code execution.
I just spent at least 6 hours on this. I have a solution, but I also submitted a technical support ticket to apple to try to get more info on the cause and proper solution.
Simply remove the references to your storyboard files and add them back in the same file group.
This seems to include the storyboard files back into the app bundle generated during build(which can be seen in the
DerivedData/APPNAME/Build/Products/Debug-iphonesimultator/APPNAME.app
From here I can see my changes reflected from the storyboards as expected.
PS - Are you using localization at all? I was.
I lost 2 hours to this.
Solution was braindead simple: delete app, turn OFF the iPhone 5S (iOS 7.1.1), and turn it bavk on.
When you turn on localization,
xcode moves storyboard file in localization folder (ex. Base.lproj/name.storyboard). When you build and run project on simulator, xcode copy name.storyboard into "derivedData"/Base.lproj/name.storyboard, but previous, created before localization "derivedData"/name.storyboard still exists. In this case simulator uses the file which can be found easier, i.e simulator uses old file "derivedData"/name.storyboard to operate.
Solution: Just rename the storyboard file, in navigator and in targets/general.
This error happened to me for the first time when I had multiple copies of a project on my computer. For whatever reason, the fact that there were multiple copies were making it look as if the storyboard had not been updated between copies and in some cases the code was not updated. I thought I had forgotten to throw the right copy on my flash drive before going home, but it turned out it's an XCode error.
Delete any multiple copies using the same name, restart XCode and open your most recent copy. Extremely bizarre, but I will probably use BitBucket or GitHub from now on instead of throwing it on a flash drive.
Deleting
~/Library/Developer/Xcode/derivedData/
worked for me!
I just have the same problem after localizationMy solution is clicking Product, Clean build folder. Then it will be fine
The storyboard on the simulator was what it should have been. The storyboard on the device would not update. I had to delete the application from the iPhone and then re-run it on the device in order to get the Storyboard to update on the device. Fortunately for me it was only test data, but I was using Auto-Layout on one view and went back to manual. I think that's what caused the issue for me.
I find that removing and adding storyboard file back doesn't work in my case, also it has side effects like it will automatically add a main nib entry into App's plist file (which subsequently makes the App fails to launch in iPhone simulator).
I don't want to try to delete the application from the simulator since I have many files under the Document directory of the App.
At last I find another way that works well: simply delete the "/Users/$username/Library/Application Support/iPhone Simulator/7.1/Applications/$app/$yourapp.app" file. The files under Documents directory are untouched.
(I have localized my storyboard as well.)
I found this same thing happened with Xcode 6.1.1 if I happened to have copied a project; the new project run in the simulator was actually still reflecting the old, original project.
In my case the problem was with how the default area was set up for derived data (essentially the location where the binary files go for a build). Mine was set to legacy and the simulator was using the wrong project, even after a clean. The solution was to go to Preferences->Locations, press Advanced, and change the location from Legacy to Unique.
I get this too when using localized storyboards - Run in Xcode just refuses to install the latest version of the compiled storyboard. I think it is something to do with the way Run copies changed resources across to the device - it does it differently than other forms of on device app installation.
The quickest way to get past this without deleting the app and losing any data is to:
Generate an Archive build in Xcode
Export this for Adhoc deployment
Double-click on the generated IPA to add it to iTunes
From the device page in iTunes force an update to that app
In order for iTunes to see that you have a new version your app build number will need to be incremented (if you don't do that already), before generating the archive.
I find this method means you don't have to delete an app off the device, you're just forcing it to install the entire install package rather than a diff which is what I think Run is doing.
I'm not sure what causes this, if it is a localized resources bug or what, but this is still a problem in Xcode 7 for me.
I took a project I did recently where the app was universal and I copy-pasted the project. With the copy, I've done a Lite version where I don't support iPad.
I've changed everything I think necessary to make this project as unique, independently that it was a copy from another project: changed the bundleID (matches with the first version on the store), project name, display name, etc. I've removed the iPad storyboard and all the iPad icons. I've also removed the iPad icons from the plist.
Now the App is ready to go and i'm trying to validate it with Apple. Then it gives me the following error:
Icon specified in the Info.plist not found under the top level app wrapper: Icon-72#2x.png (-19007)
but for all the "missing" icons. Before I tried to validate, the debugger said nothing but after the validation attempt, it now give me 6 warnings, which say the same as the error above. One warning per "missing Icon".
I've tried to delete derived data from xcode, clean the project, restart Xcode, etc. But it keeps telling me the same.
Any idea? Thanks in advance!
If you change from universial to iPhone-only via project interface, the iPad-Icon and the iPad-Storyboard are still in the info.plist.
Just open the info.plist as Propertylist and delete the wrong entries.
Closed. This question needs to be more focused. It is not currently accepting answers.
Want to improve this question? Update the question so it focuses on one problem only by editing this post.
Closed 6 years ago.
Improve this question
Xcode has stopped being able to run my app, it started directly after I deleted it from the device and attempted to re-install by rerunning it in Xcode (something I've done hundreds of times before).
It says
"Could not launch XXX.app"
"No such file or directory (/Users/Mylaptop/Library/Developer/Xcode/DerivedData/MyApp-ekxcbebfpzkahtfkujyqkcwprzia/Build/Products/Debug-iphoneos/MyApps.app/MyApp)."
I've rebooted the phone, relaunched Xcode, cleaned everything, rebuilt everything. This error message won't go away.
This is with Xcode 4.5 which I've been using since it became available, if I revert to 4.3.2 then Xcode says "Finished running app" but it doesn't actually do anything - the app is neither installed nor run.
I'm completely stuck - unable to run anything on the device anymore.
Any suggestions?
That is really annoying. This error happens in a number of different situations. Sometimes restarting the Xcode, fixes the problem. If not, follow these steps:
Disconnect your device.
Delete the app from your device.
Quit Xcode (Do not just simply close the window, quit it)
Delete derived data folder (~/Library/Developer/Xcode/DerivedData/-gbrvhlvwmpiobxdujegtghggrffp - or something like that)
Now start Xcode once again, connect device and run the project. It should work fine.
from DhilipSiva blog
Try deleting "Required device capabilities" in the -Info.plist file.
You can't require armv7 on a 3G, and you can't require armv6 on any newer device, so just delete this attribute entirely.
I found the answer. The iOS deployment target's version was not the same as my device's OS version.
First tried some of the above with info.plists and deleting derived data, clean, etc.
My solution: quit XCode, reopen project. Go to derived data in Finder. Deleted data for all projects (was all trashable, but I would try deleting your troubled projectdata first). And then it worked again. Deleting derived data from XCode didn't work.
The following resolved my problem... my app worked for me in debug/release, then I built a few ad-hoc archives and debug/release builds stopped working.
Symptoms:
invalid entitlements errors when launching from Xcode to device (play with entitlements...)
immediate abort with no error (finished running ) when running simulator
could not launch ... directory blabla.../build/product/debug-iphoneos/... not found when launching from Xcode to device.
Eventually after trying to benefit from everyone else's pain I found in Targets [AppName]:
Build Settings
Build Locations
Build Products Path build
should be
Build Products Path build/Products
No idea how this got set incorrectly.
This must be hard-coded somewhere in Xcode/Springboard because 'Products' appears in both Xcode and in the Device console.
This is Xcode 4.5.1.
I solved this problem by
renaming a directory above my XCode project
Changing the name of the project in XCode fixed it for me.
In XCode, under the Project Navigator, click the project name, and it should let you rename it just like a file in Finder. Deleting derived data did not help.
I built my XCode Project with CMake and somehow it (or my stupid self) deleted or emptied the property "Executable file" in the info.plist. I set it back to ${EXECUTABLE_NAME} and it worked again.
Took me really alot of time working through all the suggestions and fixes until I finally found that problem.
Hope this will help some one struggling with the same problem
Edit:
It was in some way CMake messing up my plist file. I created my own Info.plist and used it the following way:
SET_TARGET_PROPERTIES( MyApp PROPERTIES MACOSX_BUNDLE_INFO_PLIST ${CMAKE_CURRENT_LIST_DIR}/MyApp.plist )
Inside my plist I had this entry:
<key>CFBundleExecutable</key> <string>${EXECUTABLE_NAME}</string>
Unfortunately CMake still seems to parse that file and replaced ${EXECUTABLE_NAME} with an empty string since its the CMake variable syntax. My quick work around is the following:
SET( EXECUTABLE_NAME "\${EXECUTABLE_NAME}" )
Now it works like a charm.
I am probably alone with exactly this problem, but who knows.
I had the same problem, but in my case I had a wrong requirement in my info.plist (require gyroscope for an iPhone 3Gs)
I tried to run my project on a different system other than that on which it was developed. I was getting “Could not launch xxx.app: .. No such file..”.
Removed the app from the device and then deleted the derived data from organizer in xcode for the app.
Organizer-->Projects-->Derived DAta-->Delete
My problem was resolved.
You need to set the deployment target LOWER than your device's version
For me, the solution was just to use the correct (non-distribution) provisioning profile.
I was defaulting to always using my ad hoc provisioning profile, but then I changed to using my developer profile (team profile) and that solved things. I went ahead and cleaned out the Derived Data directory to be safe but I don't know for certain if it is required.
XCode used to have a warning that told you to use the correct provisioning profile but that error message seems to have gone away in XCode 4.5.
I've had this problem by a very strange solution.
My problem was slightly different as I have 2 Developer certificates in Keychain. We have two developer accounts (lets say AD and BD).
1) I did change Bundle identifier from com.BD.game to com.AD.game
2) Device on which I had problems was only signed in AD provisioning profiles.
3) I was unable to debug the game on iPad - although the device had valid provisioning profiles, I had valid certificates, I restarted Mac, device, reinstalled Xcode ... nothing helped.
Do what i did today was examining the project.pbxproj file for any strange entries.
What I found was that Xcode was using proper provisioning profile, but signed the ipa/app with wrong certificate.
"CODE_SIGN_IDENTITY[sdk=iphoneos*]" = "iPhone Developer: **BD** (XX******)";
After I manualy corrected the name and id; everything works like charm.
I got the same error. In my case I was set deployment target as 6.1 and trying to run an iOS 5.1 iPad. When I changed my deployment target to 4.3, issue solved.
Still having the problem . Try this
Disconnect your device.
Delete the app from your device.
Quit xcode.
Now start Xcode, connect device and run the project. It should work fine.
For me (using IOS 7 and Xcode 5), the error went away right after I did "Add to Member Center" with my device in the Organizer.
I would like to mention that the easiest way to open the DerivedData folder in Finder is the following:
Open the Organizer.
Click on "Projects".
Select your problematic project.
Next to the path of the DerivedData, click on the little right-arrow button.
Deleting the contents of the DerivedData folder worked for me. Instead of using the "Delete..." button, you should have more success deleting the files manually through Finder.
Go to: your project Target - > Info and from CustoM iOS Target Properties remove the Required Device Capabilities.
In my case that were armv7 and armv7s.
After that the app was built successfully on my iPhone 4.
This is how it looks after i removed both of requirements
For me, I forgot that I had "telephony" in the "Required device capabilities" in the info.plist. Removed that, and it finally worked on my iPad.
For me restarting of Xcode, cleaning DerivedData and restaring device wasn't enough in most cases, until I had figured out that iTunes was also running, and after quitting iTunes everything worked fine!
So my steps now are simple:
1. Quit Xcode.
2. If iTunes is running, quit iTunes.
3. Reopen project.
No need to remove app from the device, clean project or restart/disconnect device.
I think that's because Xcode and iTunes use some common libraries (as you know, Xcode Installer always asks to quit iTunes on installing iOS SDK).
I had this problem and tried a number of the suggestions which didn't work for me - then I found the one about removing the "Required device capabilities" in the -Info.plist file (which for me included location-services & gps)
That worked!
I then re-added them and it still worked.. go figure.
This was xCode 4.6.1 & my app is developer with Phonegap/Cordova
I tried all the above and yet it still wouldn't run. I fixed the problem by changing the derived build location. File>Project settings>"derived data location" change to project-relative. Or you could just make sure the default path has permission to read/write.
My issue seemed to be picking picking Portrait (top home button) as Item 0 in Supported Interface orientations in my plist. Removing that or moving it down seemed to fix my problem. Go figure.
I had this problem too for a Universal app with Xcode 4.5 on my iPhone ONLY, where I had two debug devices:
iPhone 4 iOS 5.1.1
iPad 1 iOS 5.1.1
The Info.plist had an empty entry under "Required device capabilities"
I know that I did not enter this empty 'Item 0'. The app loads on the iPhone
since I removed the empty item. I did not encounter
this problem on any of several earlier versions of Xcode,
This means that Xcode 4.5 handles this 'inserted' item differently
for the two devices I use. I have been wrong before, but this does seem
like a bug in Xcode 4.5.
This may seem obvious but you must also set your deployment target to the operating system that your device is running.
So if you upgrade to iOS 6, it will set your deployment target to iOS 6. You'll need to deploy to 5.1 if the device you are testing on still runs 5.1.
My issue finally got resolved by checking to make sure that the productName attribute in the /* Begin PBXNativeTarget section */ section of my project.pbxproj file matched the name attribute.
Once editing it so that they were the same, Xcode finally runs the app on my device correctly!
Thanks to Max Weisel for helping me! :D
Deleting the derived data folder did not help for me.
Using Xcode 4.4.2 the only solution was to open Organizer and delete old expired and extraneous provisioning profiles on the iDevice. Then everything worked perfectly again.
This may be a red herring, but I experienced these problems when I added custom launch images before deleting the default ones. Deleting the default launch and custom images and then adding back in the custom ones fixed it for me. I'm working with iOS 6 and Xcode 4.5.2
There seems to be a few different things that can cause this very helpful error message.
For me, it was down to an incorrect "Required device capabilities" in the Info.plist. I had added a blank array item by mistake (on top of the the architecture, armv7).
Deleted the blank array item and now everything is fine!
I had this problem and nothing really helped except:
My problem started after changing the contents of my info.plist and no reverting had helped.
What solved it for me was:
Create a vanilla info.plist in a brand new project
replace the old info.plist with the new
renaming it (like app_info.plist)
Set Build Settings/Packaging/INFOPLIST_FILE to be the new one.
Make all the changes you need for your project
Hope that helps. I tried everything else suggested here and this was the only solution for me.
Facing same problem but now problem is solved, i deleted Executable file info.plist. I set it back to ${EXECUTABLE_NAME} and it worked again.. :)
In my case i just set 777 permission directly to xxx.app folder to all files and work!