I'm using phoneGap application. I created new app. Then drop and drag the CordovaLib.xcodeproj into smaple app. But when launch xcode it's showing empty in version field. Is it correct or i need to change? I have version empty in xcode like below picture. Is it correct?
As long as the version number is represented correctly in config.xml, it doesn't matter as much.
However, this doesn't mean it isn't without problem. Many Xcode services will error when attempting to perform various tasks, such as validating the app with Xcode's iTunes Connect integration.
Ideally, the version number in Xcode and config.xml should match. If they don't, fix it!
Related
I have created a developer account for two weeks, and now I want to submit my first App. However, when I click new app, the bundle ID list does NOT show the project I would like to submit, but It do show some projects I used to practice. I have look up a variety of solutions on internet, including sign out and log in again, or clean up my Safari data. I have suspected some reason, but I'm not quite sure if it right?
First doubt : some SDK import?
The Bundle ID shows on the list are some small project I used to practice when I was a beginner. Recently, I have tried to use some SDK like Facebook SDK and Firebase. Facebook and Firebase works fine on my simulator and iPhone devices. So I'm not quite think this might be the reason, nut just type on in case I missed something
Second doubt : Xcode version?
When I tried to using Firebase, since iOS 13.3.1 seems not to support, so I update my iPhone to iOS 13.4.1. However, the Xcode should also be updated to 11.4.1, otherwise it cannot connect to my devices. When I look up the bundle IDs listed on App Store Connect, I think those projects are created before I updated Xcode. The project created after updated not showed on the list. But I have created too many projects to practice, so I'm not quite sure I remembered right. I suspect this might be the reason, anyone else met the same problem after updated Xcode?
By the way, there is also a strange thing confused me. I have deleted some projects I used to practiced on my MAC, but they stilled shown on the list... I have manually deleted on my Apple Developer Web.
1) Go to https://developer.apple.com/account and set up the app with its explicit bundle ID.
2) Then go to https://appstoreconnect.apple.com > "Create new app" > Select the previously created bundle ID.
This does not really have anything to do with SDK usage or Xcode setup. (Automatic code signing might do some steps for you, but the most bullet-proof way is mentioned above)
When I run the project and add the app in simulator for the first time, everything is okay. But when I run it again, Xcode prompts this message as a pop-up window at the end of compilation:
This app could not be installed at this time.
I already checked the relevant question, and tried all the advised ways to solve this issue; checking mentioned logs, cleaning project, restarting simulator, changing it, erasing all content and settings in it. Nothing works. I must erase the app and recompile it every time to open the app. Did you get the same message before? Is there any way to detect problem and resolve it? Btw, I use Xcode 9.2 at High Sierra.
This error pop-up may come up for different reasons. There is no specific reason to see it for now. In my case, a JSON file that I added to Bundle in order to provide mock data triggered this issue. This file was containing a Turkish letter in one of the keys. After I fix it, the pop-up is gone. Interestingly, earlier simulators (<=9.1) work properly if JSON file contains Turkish letter but 9.2 simulators cannot tolerate it.
Worked for me when I rebuild the project after deleting the derived data folder.
I think I may have found a solution. This all started a short time after I let Xcode update my project settings. Specifically on my CocoaPod-Subproject. I removed the pods and reinstalled them and now I am no longer getting the pop-up.
No matter what I change the version or build number to in xCode I get this error code. When I change the version number it does not update when archiving the app.
E.g. I change 1.0 to 1.1 and everything in xcode shows up with the updated 1.1, but when I hit archive, the archived app shows 1.0.
Thanks for any help.
So it appears I was updating the wrong part of settings. On the top bar on the left hand side where it says "General Capabilities etc." where it has your app name. I was updating the target with the round E instead of the one with the App Store symbol. Don't really know what the difference is but as soon as I changed the target my archive reflected the new version number.
Since few days, every time I try to run my app on my iPhone, I get get this error message "There was an internal API error".
I'm getting this error just with one application only on my iPhone. In fact, there's no problem with the same app on simulator or on my iPad. No problem too with other apps on my iPhone...
I've tried many things mentioned in those threads:
"There was an internal API error." while running an app on any iPhone/iPod-touch device
Xcode 4.4 - There was an internal API error
like remove/re-run the app, reboot iPhone/mac, clear cache, check plist, check profiles, check build settings, restore iPhone.
I'm using xCode 7.1.1 and iOS 7.1.2
Can someone point me on what I forget to check please ?
As per my work and research I got a solution. Since I was preparing the build in manual way from product. In that case my appname.app was copying in folder from which I have to create a build, that app was not copied properly and I prepared the build and installed in my device, in that case I got this error.
I again clean the Xcode prepare the build properly and installed it, it works.
When I rename my project and delete the special character "ç", xCode success to run the app on my iPhone. It might be related to xCode 7, before there was no problem for compiling.
I also had this problem. The way I solved it was by removing the special characters from the Product Name (in Build Settings) - I had an 'æ'. Indeed, it looks related to Xcode 7, because it used to work on previous versions of Xcode.
I have a working app in Xcode, however when I try to build and run it the simulator displays an older version of the storyboard I was working on. I had changed some of the design on the storyboard but this does not reflect in the simulator, nothing is updated.
Does anyone have any ideas?
Delete the App on the simulator.
Clean
List item
Build & Run
Use NSLog(#"") in your controller to check code execution.
I just spent at least 6 hours on this. I have a solution, but I also submitted a technical support ticket to apple to try to get more info on the cause and proper solution.
Simply remove the references to your storyboard files and add them back in the same file group.
This seems to include the storyboard files back into the app bundle generated during build(which can be seen in the
DerivedData/APPNAME/Build/Products/Debug-iphonesimultator/APPNAME.app
From here I can see my changes reflected from the storyboards as expected.
PS - Are you using localization at all? I was.
I lost 2 hours to this.
Solution was braindead simple: delete app, turn OFF the iPhone 5S (iOS 7.1.1), and turn it bavk on.
When you turn on localization,
xcode moves storyboard file in localization folder (ex. Base.lproj/name.storyboard). When you build and run project on simulator, xcode copy name.storyboard into "derivedData"/Base.lproj/name.storyboard, but previous, created before localization "derivedData"/name.storyboard still exists. In this case simulator uses the file which can be found easier, i.e simulator uses old file "derivedData"/name.storyboard to operate.
Solution: Just rename the storyboard file, in navigator and in targets/general.
This error happened to me for the first time when I had multiple copies of a project on my computer. For whatever reason, the fact that there were multiple copies were making it look as if the storyboard had not been updated between copies and in some cases the code was not updated. I thought I had forgotten to throw the right copy on my flash drive before going home, but it turned out it's an XCode error.
Delete any multiple copies using the same name, restart XCode and open your most recent copy. Extremely bizarre, but I will probably use BitBucket or GitHub from now on instead of throwing it on a flash drive.
Deleting
~/Library/Developer/Xcode/derivedData/
worked for me!
I just have the same problem after localizationMy solution is clicking Product, Clean build folder. Then it will be fine
The storyboard on the simulator was what it should have been. The storyboard on the device would not update. I had to delete the application from the iPhone and then re-run it on the device in order to get the Storyboard to update on the device. Fortunately for me it was only test data, but I was using Auto-Layout on one view and went back to manual. I think that's what caused the issue for me.
I find that removing and adding storyboard file back doesn't work in my case, also it has side effects like it will automatically add a main nib entry into App's plist file (which subsequently makes the App fails to launch in iPhone simulator).
I don't want to try to delete the application from the simulator since I have many files under the Document directory of the App.
At last I find another way that works well: simply delete the "/Users/$username/Library/Application Support/iPhone Simulator/7.1/Applications/$app/$yourapp.app" file. The files under Documents directory are untouched.
(I have localized my storyboard as well.)
I found this same thing happened with Xcode 6.1.1 if I happened to have copied a project; the new project run in the simulator was actually still reflecting the old, original project.
In my case the problem was with how the default area was set up for derived data (essentially the location where the binary files go for a build). Mine was set to legacy and the simulator was using the wrong project, even after a clean. The solution was to go to Preferences->Locations, press Advanced, and change the location from Legacy to Unique.
I get this too when using localized storyboards - Run in Xcode just refuses to install the latest version of the compiled storyboard. I think it is something to do with the way Run copies changed resources across to the device - it does it differently than other forms of on device app installation.
The quickest way to get past this without deleting the app and losing any data is to:
Generate an Archive build in Xcode
Export this for Adhoc deployment
Double-click on the generated IPA to add it to iTunes
From the device page in iTunes force an update to that app
In order for iTunes to see that you have a new version your app build number will need to be incremented (if you don't do that already), before generating the archive.
I find this method means you don't have to delete an app off the device, you're just forcing it to install the entire install package rather than a diff which is what I think Run is doing.
I'm not sure what causes this, if it is a localized resources bug or what, but this is still a problem in Xcode 7 for me.