I am new on iOS, i am trying to download 3 products from my service but the user needs to buy these products, i have 3 buttons, i click first one and after enter username and password, it is downloading, then i click second product, firstly it is downloading first product then second product,then i click third product, it is downloading first->second->third product.How can i remove the first product from the queue after download first product? Sorry for my bad english.
Thanks.
Best Regards.
- (IBAction)downloadButtonPressed:(id)sender {
SKPayment *payment = [SKPayment paymentWithProductIdentifier:#"com.company.testtest123"];
[[SKPaymentQueue defaultQueue] addTransactionObserver:self];
[[SKPaymentQueue defaultQueue]addPayment:payment];
}
- (void)paymentQueue:(SKPaymentQueue *)queue removedTransactions:(NSArray *)transactions {
for (SKPaymentTransaction *transaction in transactions) {
// Count down
#synchronized(self) {
NSInteger numOfTransaction = [[NSUserDefaults standardUserDefaults] integerForKey:#"NumberOfTransactions"];
[[NSUserDefaults standardUserDefaults] setInteger:numOfTransaction-1 forKey:#"NumberOfTransactions"];
[[NSUserDefaults standardUserDefaults] synchronize];
}
}
}
-(void)productsRequest:(SKProductsRequest *)request didReceiveResponse:(SKProductsResponse *)response{
SKProduct *validProduct =nil;
int count = [response.products count];
if (count>0) {
validProduct =[response.products objectAtIndex:0];
}else if(!validProduct){
NSLog(#"No products avaible");
}
}
-(void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray *)transactions{
for (SKPaymentTransaction *transaction in transactions) {
switch (transaction.transactionState) {
case SKPaymentTransactionStatePurchasing:
break;
case SKPaymentTransactionStatePurchased:{
//download kismi buraya
NSLog(#"_mainDict = %#",_mainDict);
float _csize = (float) 0 / 1024;
float _tsize = (float) [[_mainDict valueForKey:#"Size"] integerValue] / 1024;
NSString *strDownload = [NSString stringWithFormat:#"downloading \n (%0.2f MB/%.2f MB)",_csize,_tsize];
[SVProgressHUD showProgress:0 status:strDownload maskType:SVProgressHUDMaskTypeBlack];
[service servicePicList];
[[SKPaymentQueue defaultQueue]finishTransaction:transaction];
break;
}
case SKPaymentTransactionStateRestored:{
[[SKPaymentQueue defaultQueue]finishTransaction:transaction];
break;
}
case SKPaymentTransactionStateFailed:
{
if (transaction.error.code != SKErrorPaymentCancelled) {
NSLog(#"An error encountered");
}
[[SKPaymentQueue defaultQueue]finishTransaction:transaction];
break;
}
}
}
}
- (void)failedTransaction:(SKPaymentTransaction *)transaction {
NSLog(#"failedTransaction...");
if (transaction.error.code != SKErrorPaymentCancelled)
{
NSLog(#"Transaction error: %#", transaction.error.localizedDescription);
}
[[SKPaymentQueue defaultQueue] finishTransaction: transaction];
}
i solved the my question :) i just added this line [[SKPaymentQueue defaultQueue] removeTransactionObserver:self]; and now it is working ...:)
-(void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray *)transactions{
for (SKPaymentTransaction *transaction in transactions) {
switch (transaction.transactionState) {
case SKPaymentTransactionStatePurchasing:
break;
case SKPaymentTransactionStatePurchased:{
//I added this line.
[[SKPaymentQueue defaultQueue] removeTransactionObserver:self];
NSLog(#"_mainDict = %#",_mainDict);
float _csize = (float) 0 / 1024;
float _tsize = (float) [[_mainDict valueForKey:#"Size"] integerValue] / 1024;
NSString *strDownload = [NSString stringWithFormat:#"downloading \n (%0.2f MB/%.2f MB)",_csize,_tsize];
[SVProgressHUD showProgress:0 status:strDownload maskType:SVProgressHUDMaskTypeBlack];
[service servicePicList];
[[SKPaymentQueue defaultQueue]finishTransaction:transaction];
break;
}
case SKPaymentTransactionStateRestored:{
[[SKPaymentQueue defaultQueue]finishTransaction:transaction];
break;
}
case SKPaymentTransactionStateFailed:
{
if (transaction.error.code != SKErrorPaymentCancelled) {
NSLog(#"An error encountered");
}
[[SKPaymentQueue defaultQueue]finishTransaction:transaction];
break;
}
}
}
}
Related
I have implemented in-app purchase in my app. My problem is when a new user clicks on restore button, the process is not stopped after completing 1 cycle And execute again and again. After executing 3 to 4 times process get stopped.
I want to stop process instant when a new user doesn't have any purchased transaction.
Here is code of my IAP class.
- (void)restorePurchases
{
[[SKPaymentQueue defaultQueue] restoreCompletedTransactions];
}
- (void)paymentQueue:(SKPaymentQueue *)queue restoreCompletedTransactionsFailedWithError:(NSError *)error
{
[[SKPaymentQueue defaultQueue] removeTransactionObserver:self];
[ProgressHUD dismiss];
}
- (void)paymentQueueRestoreCompletedTransactionsFinished:(SKPaymentQueue *)queue
{
[[SKPaymentQueue defaultQueue] removeTransactionObserver:self];
[ProgressHUD dismiss];
}
// Sent when transactions are removed from the queue (via finishTransaction:).
- (void)paymentQueue:(SKPaymentQueue *)queue removedTransactions:(NSArray *)transactions
{
[[SKPaymentQueue defaultQueue] removeTransactionObserver:self];
[ProgressHUD dismiss];
}
// Called when the transaction status is updated
-(void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray *)transactions {
for (SKPaymentTransaction *transaction in transactions) {
switch (transaction.transactionState)
{
case SKPaymentTransactionStatePurchasing:
[self transactionStart:transaction];
break;
case SKPaymentTransactionStatePurchased:
[self transactionComplete:transaction];
[[SKPaymentQueue defaultQueue]
finishTransaction:transaction];
break;
case SKPaymentTransactionStateFailed:
[self transactionFailed:transaction];
[[SKPaymentQueue defaultQueue]
finishTransaction:transaction];
break;
case SKPaymentTransactionStateRestored:
{
[self transactionRestored:transaction];
[[SKPaymentQueue defaultQueue]
finishTransaction:transaction];
break;
}
default:
break;
}
}
}
#pragma mark - Local method for mange transactions -
-(void)transactionStart:(SKPaymentTransaction *)transaction
{
if([self.delegate respondsToSelector:#selector(startPayment:)]){
[self.delegate startPayment:transaction];
}
}
-(void)transactionComplete:(SKPaymentTransaction *)transaction
{
if([self.delegate respondsToSelector:#selector(completePayment:)]){
[self.delegate completePayment:transaction];
}
}
-(void)transactionFailed:(SKPaymentTransaction *)transaction
{
if ([self.delegate respondsToSelector:#selector(failedPayment:)]) {
[self.delegate failedPayment:transaction];
}
}
-(void)transactionRestored:(SKPaymentTransaction *)transaction
{
if([self.delegate respondsToSelector:#selector(restoredPayment:)]){
[[AppDelegate sharedAppDelegate].arrayConacatResponse addObject:[NSString stringWithFormat:#"transactionRestored method "] ];
[self.delegate restoredPayment:transaction];
}
}
In Restore payment method
- (void)restoredPayment:(SKPaymentTransaction *)transactions
{
if ([transactions.payment.productIdentifier isEqualToString:monthlySubscription]) {
NSURL *receiptURL = [[NSBundle mainBundle] appStoreReceiptURL];
NSError *receiptError;
BOOL isPresent = [receiptURL checkResourceIsReachableAndReturnError:&receiptError];
if (isPresent)
{
NSData *receiptData = [[NSData alloc] initWithContentsOfURL:[[NSBundle mainBundle] appStoreReceiptURL]];
BOOL isSubscriptionPeriodValid = [[DataBase sharedInstance] getSubscriptionStatusFromAppleWithReceipt:receiptData];
if (isSubscriptionPeriodValid)
{
[self removeFromSuperview];
}else{
// Here I want to stop
[CommonUtilities showAlertWithTitle:#"" Message:#"You have no transaction to restore."];
}
}
}
[ProgressHUD dismiss];
}
I create IAP in itune connect (non-consumable) to access view controller but I test in iPhone it not pop up to purchase page
my IAP product ID is "Egayov"
my app id is "my.com.th.myapp"
this is my code
- (void)viewDidLoad {
[super viewDidLoad];
if([SKPaymentQueue canMakePayments]){
NSLog(#"can buy all IAP");
SKProductsRequest *productRequest = [[SKProductsRequest alloc]initWithProductIdentifiers:[NSSet setWithObject:#"my.com.th.myapp"]];
productRequest.delegate = self;
[productRequest start];
}
else{
NSLog(#"Parental controll on");
}
}
-(IBAction)Buyvoyage{
SKPayment *vo = [SKPayment paymentWithProductIdentifier:#"my.com.th.myapp"];
[[SKPaymentQueue defaultQueue] addTransactionObserver:self];
[[SKPaymentQueue defaultQueue] addPayment:vo];
}
- (void)productsRequest:(SKProductsRequest *)request didReceiveResponse:(SKProductsResponse *)response
{
SKProduct *vaildproduct = nil;
int count = [response.products count];
if (count>0) {
vaildproduct = [response.products objectAtIndex:0];
}
if (!vaildproduct){
NSLog(#"no iap %#",vaildproduct);
}
}
-(void)paymentQueue:(SKPaymentQueue *)queue removedTransactions:(NSArray *)transactions{
for (SKPaymentTransaction *transaction in transactions) {
switch (transaction.transactionState) {
case SKPaymentTransactionStatePurchasing:
break;
case SKPaymentTransactionStatePurchased:
[self checkiap];
break;
case SKPaymentTransactionStateRestored:
[[SKPaymentQueue defaultQueue]finishTransaction:transaction];
break;
case SKPaymentTransactionStateFailed:
if (transaction.error.code != SKErrorPaymentCancelled) {
NSLog(#"Payment Failed");
}
[[SKPaymentQueue defaultQueue]finishTransaction:transaction];
break;
}
}
}
in productrequest function it go to else condition
I had the same problem and honestly saying it wasn't solved. It's much easier to implement IAPs with Parse. It takes just few lines of code and it really works. Read this, I'm sure it will help you:
http://blog.parse.com/announcements/in-app-purchase/
I having problem to get the previus purchases from app store. I can buy products and validate the receipt but when I try to restore them, the list of purchased transactions is empty. :(
Any idea? Something i forgoten or dosen't it work in sandbox?
- (void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray*)transactions
{
//Is only fired when buying and not restoring.
for (SKPaymentTransaction * transaction in transactions) {
switch (transaction.transactionState)
{
case SKPaymentTransactionStatePurchased:
[self completeTransaction:transaction];
break;
case SKPaymentTransactionStateFailed:
[self failedTransaction:transaction];
break;
case SKPaymentTransactionStateRestored:
[self restoreTransaction:transaction];
default:
break;
}
};
}
- (void)restoreCompletedTransactions {
[[SKPaymentQueue defaultQueue] addTransactionObserver:self];
[[SKPaymentQueue defaultQueue]restoreCompletedTransactions];
}
-(void)completeTransaction:(SKPaymentTransaction *)transaction {
NSLog(#"completeTransaction...");
[self validateReceiptForTransaction:transaction];
_isPurchased = YES;
[self provideContentForProductIdentifier:transaction.payment.productIdentifier];
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
}
define kMDPulseSubscriptionProductIdentifier #"Your Product ID here...."
SKPaymentTransactionOBserver:
- (void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray *)transactions
{
for (SKPaymentTransaction *transaction in transactions) {
switch (transaction.transactionState) {
case SKPaymentTransactionStatePurchasing:
NSLog(#"Prossing.............");
break;
case SKPaymentTransactionStatePurchased:
{
[self completeTransaction:transaction];
NSError* error;
NSDictionary* jsonDict = [NSJSONSerialization
JSONObjectWithData:transaction.transactionReceipt
options:kNilOptions
error:&error];
NSLog(#"JSON Receipt: %#",jsonDict);
[[NSUserDefaults standardUserDefaults] setObject:jsonDict forKey:#"A"];
NSLog(#"Purchase was a Success.....");
}
break;
case SKPaymentTransactionStateFailed:
[self failedTransaction:transaction];
NSLog(#"Purchase cancelled");
break;
case SKPaymentTransactionStateRestored:
[self restoreTransaction:transaction];
default:
break;
}
}
}
- (void)completeTransaction:(SKPaymentTransaction *)transaction {
NSLog(#"completeTransaction...");
[self validateReceiptForTransaction:transaction];
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
}
- (void)restoreTransaction:(SKPaymentTransaction *)transaction {
NSLog(#"restoreTransaction...");
[self validateReceiptForTransaction:transaction];
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
}
- (void)failedTransaction:(SKPaymentTransaction *)transaction {
NSLog(#"failedTransaction...");
[[SKPaymentQueue defaultQueue] finishTransaction: transaction];
if (transaction.error.code != SKErrorPaymentCancelled)
{
NSLog(#"Transaction error: %#", transaction.error.localizedDescription);
}
[[SKPaymentQueue defaultQueue] finishTransaction: transaction];
}
- (void)provideContentForProductIdentifier:(NSString *)productIdentifier {
if ([productIdentifier isEqualToString:kMDPulseSubscriptionProductIdentifier]) {
[self purchaseSubscriptionWithMonths:1];
}
[[NSNotificationCenter defaultCenter] postNotificationName:IAPHelperProductPurchasedNotification object:productIdentifier userInfo:nil];
}
- (void)paymentQueue:(SKPaymentQueue *)queue restoreCompletedTransactionsFailedWithError:(NSError *)error {
NSLog(#"%s","User Cancel.");
}
- (void)paymentQueueRestoreCompletedTransactionsFinished:(SKPaymentQueue *)queue
{
NSLog(#"Restore completed transactions finished.");
NSLog(#" Number of transactions in queue: %d", [[queue transactions] count]);
for (SKPaymentTransaction *trans in [queue transactions])
{
NSLog(#" transaction id %# for product %#.", [trans transactionIdentifier], [[trans payment] productIdentifier]);
NSLog(#" original transaction id: %# for product %#.", [[trans originalTransaction] transactionIdentifier],
[[[trans originalTransaction] payment]productIdentifier]);
if ([[[trans payment] productIdentifier] isEqual: kMDPulseSubscriptionProductIdentifier]) {
NSLog(#"Purchase Restored");
// Do your stuff to unlock
}
}
}
- (void)restoreCompletedTransactions
{
NSLog(#"Restore Tapped in transaction process");
[[SKPaymentQueue defaultQueue] addTransactionObserver:self];
[[SKPaymentQueue defaultQueue] restoreCompletedTransactions];
}
When you call this method for restoring
-(void)restoreCompletedTransactions
{
NSLog(#"Restore Tapped in transaction process");
[[SKPaymentQueue defaultQueue] addTransactionObserver:self];
[[SKPaymentQueue defaultQueue] restoreCompletedTransactions];
}
//Then this delegate Function Will be fired
-(void)paymentQueueRestoreCompletedTransactionsFinished:(SKPaymentQueue *)queue
{
alert = [[UIAlertView alloc] initWithTitle:#"IN APP PURCHASE" message:#"Processing" delegate:self cancelButtonTitle:nil otherButtonTitles:nil];
UIActivityIndicatorView *progress= [[UIActivityIndicatorView alloc] initWithFrame:CGRectMake(125, 50, 30, 30)];
progress.activityIndicatorViewStyle = UIActivityIndicatorViewStyleWhiteLarge;
[alert addSubview:progress];
[progress startAnimating];
[alert show];
[progress release];
for (SKPaymentTransaction *transaction in queue.transactions)
{
// Use this Commented code to Log and check details about your Products
/**
NSLog(#"%d",queue.transactions.count);
NSMutableArray * purchasedItemIDs = [[NSMutableArray alloc] init];
for (SKPaymentTransaction *transaction in queue.transactions)
{
NSString *productID = transaction.payment.productIdentifier;
[purchasedItemIDs addObject:productID];
NSLog(#"%#",purchasedItemIDs);
}*/
if( queue.transactions.count == 0 ) {
// User hav't purchased yet.
NSLog(#"User hav't purchased yet.");
UIAlertView* alertView = [[UIAlertView alloc] initWithTitle:#"Restore" message:#"You have not purchased yet"
delegate:self cancelButtonTitle:#"Ok" otherButtonTitles:Nil, nil];
[alertView show];
[alertView release];
}else {
// Upgrade to Full version.
NSLog(#"Upgrade to Full version.");
// Do stuffs here
//finally finish transaction
[[SKPaymentQueue defaultQueue] finishTransaction: transaction];
}
}
[alert dismissWithClickedButtonIndex:0 animated:YES];
}
Hope this helps!!
I want the payment transaction to complete once the download transaction has completed but when the download finishes for some reason the transaction state is not completed. Do i have to put the payment transaction back in the queue after the download is complete here is more code.
- (void)buyProduct:(SKProduct *)product {
NSLog(#"Buying %#...", product.productIdentifier);
SKPayment * payment = [SKPayment paymentWithProduct:product];
[[SKPaymentQueue defaultQueue] addPayment:payment];
}
- (void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray *)transactions{
for (SKPaymentTransaction * transaction in transactions) {
if(transaction.downloads){
[[SKPaymentQueue defaultQueue] startDownloads:transaction.downloads];
}else{
switch (transaction.transactionState){
case SKPaymentTransactionStatePurchased:
[self completeTransaction:transaction];
break;
case SKPaymentTransactionStateFailed:
[self failedTransaction:transaction];
break;
case SKPaymentTransactionStateRestored:
[self restoreTransaction:transaction];
default:
break;
}
}
}
}
- (void)paymentQueue:(SKPaymentQueue *)queue updatedDownloads:(NSArray *)downloads;
{
for (SKDownload *download in downloads) {
if (download.downloadState == SKDownloadStateFinished) {
[self processDownload:download]; //handle download
// now we're done
NSLog(#"Download finished");
[[SKPaymentQueue defaultQueue] finishTransaction:download.transaction];
//Do I need to add the payment transaction back in the queue? Im worried the payment will go through twice?
} else if (download.downloadState == SKDownloadStateActive) {
NSString *productID = download.contentIdentifier; // in app purchase identifier
NSTimeInterval remaining = download.timeRemaining; // secs
float progress = download.progress; // 0.0 -> 1.0
NSLog(#"Product ID:%#", productID);
NSLog(#"Time remaining: %f", remaining);
NSLog(#"Download progress percent: %f", progress);
} else { // waiting, paused, failed, cancelled
NSLog(#"Warn: not handled: %d", download.downloadState);
}
}
}
These are my methods I created for my transaction state if it matters at all? None of them are being executed anyways so I don't think it matter but here it is.
- (void)completeTransaction:(SKPaymentTransaction *)transaction {
NSLog(#"completeTransaction...");
[self provideContentForProductIdentifier:transaction.payment.productIdentifier];
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
}
- (void)restoreTransaction:(SKPaymentTransaction *)transaction {
NSLog(#"restoreTransaction...");
[self provideContentForProductIdentifier:transaction.originalTransaction.payment.productIdentifier];
if(transaction.downloads){
[[SKPaymentQueue defaultQueue] startDownloads:transaction.downloads];
NSLog(#"Download exists");
}else{
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
}
}
- (void)failedTransaction:(SKPaymentTransaction *)transaction {
NSLog(#"failedTransaction...");
if (transaction.error.code != SKErrorPaymentCancelled)
{
NSLog(#"Transaction error: %#", transaction.error.localizedDescription);
}
[[SKPaymentQueue defaultQueue] finishTransaction: transaction];
}
I have a nonconsumable IAP for a "Save Feature." It was recently rejected because I did not include a restore feature in the app. I added code for restoring, but when I created a new test user that hadn't purchased the app and pressed the restore button, the save feature was unlocked.
Here is how I check if a user has purchased the save feature
if (![userDefaults boolForKey:#"isPurchase"]){
[self purchaseMyProduct:[validProducts objectAtIndex:0]];
}
else { ... }
These are the methods I added to restore IAP's.
- (void)restorePurchases { //called when button pressed
[[SKPaymentQueue defaultQueue] addTransactionObserver:self];
[[SKPaymentQueue defaultQueue]restoreCompletedTransactions];
}
- (void)paymentQueueRestoreCompletedTransactionsFinished:(SKPaymentQueue *)queue {
for (SKPaymentTransaction *transaction in queue.transactions) {
NSString *productID = transaction.payment.productIdentifier;
if ([productID isEqualToString:#"facePuppetsSave"]) {
NSLog(#"called");
NSUserDefaults *userDefaults = [NSUserDefaults standardUserDefaults];
[userDefaults setBool:YES forKey:#"isPurchase"];
[userDefaults synchronize];
}
}
}
Here are the methods I already had.
-(void)paymentQueue:(SKPaymentQueue *)queue
updatedTransactions:(NSArray *)transactions {
for (SKPaymentTransaction *transaction in transactions) {
switch (transaction.transactionState) {
case SKPaymentTransactionStatePurchasing:
break;
case SKPaymentTransactionStatePurchased:
if ([transaction.payment.productIdentifier
isEqualToString:#"facePuppetsSave"]) {
NSUserDefaults *userDefaults = [NSUserDefaults standardUserDefaults];
[userDefaults setBool:YES forKey:#"isPurchase"];
[userDefaults synchronize];
UIAlertView *alertView = [[UIAlertView alloc]initWithTitle:
#"Purchase completed. Saving now available." message:nil delegate:
self cancelButtonTitle:#"Ok" otherButtonTitles: nil];
[alertView show];
[alertView release];
}
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
break;
case SKPaymentTransactionStateRestored:
NSLog(#"Restored ");
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
break;
case SKPaymentTransactionStateFailed:
break;
default:
break;
}
}
}
-(void)productsRequest:(SKProductsRequest *)request
didReceiveResponse:(SKProductsResponse *)response
{
SKProduct *validProduct = nil;
int count = [response.products count];
if (count>0) {
validProducts = response.products;
[validProducts retain];
validProduct = [response.products objectAtIndex:0];
}
Also, for the new test user example, I noticed that the NSLog "called" from the paymentQueueRestoreCompletedTransactionsFinished method is being called twice and "restored" from the paymentQueue:updatedTransactions: method is not being called at all.
How can I modify my code to restore properly?
Follow this:
#pragma mark SKPaymentTransactionOBserver
- (void)storeRestoreTransactionsFinished:(NSNotification*)notification
{
NSLog(#"- (void)storeRestoreTransactionsFinished:(NSNotification*)notification");
[apDelegate hideLoading];
}
- (void)paymentQueue:(SKPaymentQueue *)queue updatedTransactions:(NSArray *)transactions
{
for (SKPaymentTransaction *transaction in transactions) {
switch (transaction.transactionState) {
case SKPaymentTransactionStatePurchasing:
NSLog(#"Prossing.............");
break;
case SKPaymentTransactionStatePurchased:
{
[self completeTransaction:transaction];
NSError* error;
NSDictionary* jsonDict = [NSJSONSerialization
JSONObjectWithData:transaction.transactionReceipt
options:kNilOptions
error:&error];
NSLog(#"JSON Receipt: %#",jsonDict);
[[NSUserDefaults standardUserDefaults] setObject:jsonDict forKey:#"A"];
NSLog(#"Purchase was a Success.....");
}
break;
case SKPaymentTransactionStateFailed:
[self failedTransaction:transaction];
NSLog(#"Purchase cancelled");
break;
case SKPaymentTransactionStateRestored:
[self restoreTransaction:transaction];
default:
break;
}
}
}
- (void)restoreTransaction:(SKPaymentTransaction *)transaction {
NSLog(#"restoreTransaction...");
[self validateReceiptForTransaction:transaction];
[[SKPaymentQueue defaultQueue] finishTransaction:transaction];
}
- (void)paymentQueueRestoreCompletedTransactionsFinished:(SKPaymentQueue *)queue
{
NSLog(#"Restore completed transactions finished.");
NSLog(#" Number of transactions in queue: %d", [[queue transactions] count]);
for (SKPaymentTransaction *trans in [queue transactions])
{
NSLog(#" transaction id %# for product %#.", [trans transactionIdentifier], [[trans payment] productIdentifier]);
NSLog(#" original transaction id: %# for product %#.", [[trans originalTransaction] transactionIdentifier],
[[[trans originalTransaction] payment]productIdentifier]);
if ([[[trans payment] productIdentifier] isEqual: kMDPulseSubscriptionProductIdentifier]) {
NSLog(#"Purchase Restored");
// Do your stuff to unlock
}
}
}
- (void)restoreCompletedTransactions
{
NSLog(#"Restore Tapped in transaction process");
[[SKPaymentQueue defaultQueue] addTransactionObserver:self];
[[SKPaymentQueue defaultQueue] restoreCompletedTransactions];
}