So very new to rails. I managed to install ruby and then rails framework on Fedora 17.
Here are the summary of steps I did to install ruby and rails framework:
yum install make openssh-clients gcc libxml2 libxml2-devel libxslt libxslt-devel python-devel
sudo bash -s stable < <(curl -sk https://raw.github.com/wayneeseguin/rvm/master/binscripts/rvm-installer)
source /etc/profile.d/rvm.sh
rvm install ruby-1.9.2-p290 --with-openssl
rvm use ruby-1.9.2-p290 --default
rvm all do gem update --system
rvm all do gem install rails
Well.. So far so good.. Just wanted to test if the installation was perfect.
I created a hello world sample (test.rb) to test ruby installation
#!/usr/bin/env ruby
puts "hello World"
and running this with ./test.rb it works fine.
Now when I was test rails framework installation by creating a new project using
rails new demo
I receive the error
Fetching gem metadata from https://rubygems.org/.Unfortunately, a fatal error has occurred. Please see the Bundler
troubleshooting documentation at http://bit.ly/bundler-issues. Thanks!
What am I missing here? Or what have I done additionally which I was not suppose to do?
Looked into https://github.com/carlhuda/bundler/blob/master/ISSUES.md. Could not figure out. Has anyone come across similar issue and found a way to deal with it?
Double check that you have these packages installed...
git-core curl make bzip2 gcc-c++ patch readline readline-devel zlib zlib-devel libyaml-devel libffi-devel libxslt-devel sqlite sqlite-devel openssl openssl-devel
You might want to check out this blog post to see if it helps you at all.
Are you using Xcode 4.1 by any chance? Seems like a lot of people have run into bundler issues after upgrading to Lion (but neglecting to upgrade Xcode as well...).
As in this thread.
Related
I'm attempting to do a clean install of Ruby 2.0.0 on Lion 10.8.3 with Xcode 4.6.1. I have command line tools installed.
gcc reprots version 4.2.1
git, sqlite3, etc. are all installed.
I'm trying to do a clean install. I did the following steps
rvm uninstall all
rvm implode
Then the new install
curl -L https://get.rvm.io | bash -s stable # to install rvm
rvm requirements
I get the following response from rvm requirements.
For ruby:
Install: osx-gcc-installer libksba openssl libreadline git zlib1g libyaml libsqlite3 sqlite3 libxml2 libxslt autoconf libc6 libgdbm ncurses automake libtool bison pkg-config
What is this telling me to do? How do I install all these packages?
gcc reports version 4.2.1
git, sqlite3, etc. are all installed.
If I attempt install despite it, it eventually fails.
I do iOS development as well and can't afford to disrupt my Xcode environment.
For security reasons, as a general policy I am running under a non-admin userid. My intent in using rvm was to keep the changes local to my userid, yet other tools such as homebrew seem to require at least admin access if not sudo.
Use Homebrew to install stuff like you would with apt-get (or similar PM's) on Linux.
Link
For the plain Ruby part: There is an official GUI Tool to handle RVM for you:
http://jewelrybox.unfiniti.com/
I just installed Ruby 2.0 with 2 clicks. Depending on your XCode, Ruby Versions < 1.9p125 could be more problematic, though.
I was trying to install rails on Ubuntu Natty Narwhal 11.04, using ruby1.9.1.
I installed ruby using apt-get install ruby1.9.1-full which contains the dev package. I googled the error and all have suggested I install the 1.9.1-dev which I already have.
Building native extensions. This could take a while...
ERROR: Error installing rails:
ERROR: Failed to build gem native extension.
/usr/bin/ruby1.8 extconf.rb
extconf.rb:36:in `require': no such file to load -- mkmf (LoadError)
from extconf.rb:36
Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/bcrypt-ruby-3.0.1 for inspection.
Results logged to /usr/lib/ruby/gems/1.8/gems/bcrypt-ruby-3.0.1/ext/mri/gem_make.out
After some search for a solution it turns out the -dev package is needed, not just ruby1.8. So if you have ruby1.9.1 doing
sudo apt-get install ruby1.9.1-dev
or to install generic ruby version, use (as per #lamplightdev comment):
sudo apt-get install ruby-dev
should fix it.
Try locate mkmf to see if the file is actually there.
This is the answer that worked for me. Was in the comments above, but deserves its rightful place as answer for ubuntu 12.04 ruby 1.8.7
sudo apt-get install ruby-dev
# if above doesnt work make sure you have build essential
sudo apt-get install build-essential
I also needed build-essential installed:
sudo apt-get install build-essential
The problem is still is recursive on Ubuntu 13/04/13.10/14.04
and
sudo apt-get install ruby1.9.1-dev
worked out for me okay. So If you are using Ubuntu 13.04/13.10/14.04 then using this will really come in handy.
This works even if ruby version is 1.9.3. This is because there is no ruby1.9.3-dev available in the Repository...
Have you tried:
sudo apt-get install ruby1.8-dev
I got the similar error when install bundle
sudo apt-get install ruby-dev
Works great for me and solve the problem
Mint 16 ruby1.9.3
I think is a little late but
sudo yum install -y gcc ruby-devel libxml2 libxml2-devel libxslt libxslt-devel
worked for me on fedora.
http://nokogiri.org/tutorials/installing_nokogiri.html
You've Ruby 1.8 so you need to upgrade to at least 1.9 to make it working.
If so, then check How to install a specific version of a ruby gem?
If this won't help, then reinstalling ruby-dev again.
You can use RVM(Ruby version manager) which helps in managing all versions of ruby on your machine , which is very helpful for you development (when migrating to unstable release to stable release )
or for Linux (ubuntu) go for
sudo apt-get install ruby1.8-dev
then sudo gem install rails to verify it do rails -v it will show version on rails
after that you can install bundles (required gems for development)
Ruby version: 2.7.1
gem version: 3.1.3
You need to check the extension that could not be installed, and find the reasons.
Read the mkmf.log file showed at the installation error under "To see why this extension failed to compile, please check the mkmf.log which can be found here" , perhaps there is a missing lib ( sometimes iconv ), and you must install it.
You can search the extension with your package manager(apt, yum, pacman...) too.
(Personal case) Arch Linux->nokogiri
gem install rails
Showed me:
To see why this extension failed to compile, please check the mkmf.log
which can be found here:
/home/user/.gem/ruby/2.7.0/extensions/x86_64-linux/2.7.0/nokogiri-1.10.9/mkmf.log
Go to: https://aur.archlinux.org/packages/ruby-nokogiri/
Make sure you have all dependencies installed
Make sure you have make installed
git clone the package
cd to package
makepkg the package
Hope to help!
I'm trying to get rails up and running on my development server. It's a fedora14 box. I installed rvm, ruby 1.8.7, and rubygems 1.6.2. When I try to install rails via gem, gem install rails, i get the following error:
ERROR: Loading command: install (LoadError)
no such file to load -- zlib
ERROR: While executing gem ... (NameError)
uninitialized constant Gem::Commands::InstallCommand
Any ideas as to what is going on. I'm 100% new to ruby/rubygems/rails and I know enough about Linux to be dangerous so any help/suggestions would be greatly appreciated.
Thanks in advance
Run rvm notes and install whatever it tells you (zlib-devel will probably be one of the packages you'll need to install via yum). The output you'll see will be similar to this:
# For Ruby (MRI & Ree) you should install the following OS dependencies:
ruby: yum install -y gcc-c++ patch readline readline-devel zlib zlib-devel libyaml-devel libffi-devel openssl-devel ;
yum install -y make bzip2 ;
yum install -y iconv-devel # NOTE: For centos 5.4 final iconv-devel might not be available :(
You need to install the zlib libraries. A gem is trying to use it with a C extension but it is not found. http://fr.rpmfind.net/linux/rpm2html/search.php?query=zlib-devel&system=&arch= Install zlib-devel.
What this error means is that zlib library is missing. This is a common problem and if you google for it, you'd find loads of information on the same. In ubuntu (where I work) installing the package zlib1g-dev and zlib1g fixes it. I am not sure what the equivalent package in Fedora is, but you should be able to search / find that.
I always worked my way around Nokogiri installation issues by following the documentation in the "Installing Nokogiri" tutorial.
But this time, even after installing all the dependencies, Nokogiri hasn't been installed. I get the following error:
libxml2 is missing. please visit <http://nokogiri.org/tutorials/installing_nokogiri.html>
I tried installing it by specifying the libxml2 and libxslt directories:
sudo gem install nokogiri -- --with-xml2-include=/usr/include/libxml2 --with-xml2-lib=/usr/lib --with-xslt-dir=/usr/
but it returned the same error.
I followed all the other related Stack Overflow articles and none helped. Does anyone have a solution?
You may actually need to install both of these packages
sudo apt-get install libxslt-dev libxml2-dev
First, install the dependencies:
sudo apt-get install libxslt-dev libxml2-dev
If you still receive the error, you may be missing a compiler toolchain:
sudo apt-get install build-essential
You'll get the "libxml2 is missing" error if you're missing a build toolchain (at least I ran into this issue on Debian Lenny).
The Nokogiri build test-compiles a libxml2 header file to verify that it is present, however, it doesn't differentiate between "libxml2 is missing" and "a compiler to test libxml2 is missing".
In Mac OS X (Mavericks), installing the libraries with brew and setting NOKOGIRI_USE_SYSTEM_LIBRARIES=1 before installing the gem did the trick for me.
Summarising:
If previously installed, uninstall the gem:
gem uninstall nokogiri
Use Homebrew to install libxml2, libxslt and libiconv:
brew install libxml2 libxslt libiconv
Install the gem specifying the paths to the libraries to be linked against:
NOKOGIRI_USE_SYSTEM_LIBRARIES=1 gem install nokogiri -- --use-system-libraries --with-iconv-dir="$(brew --prefix libiconv)" --with-xml2-config="$(brew --prefix libxml2)/bin/xml2-config" --with-xslt-config="$(brew --prefix libxslt)/bin/xslt-config"
I just had the same issue on Fedora 13. After a frustrating and unsuccessful search to make
gem install nokogiri
work for me, I was able to install it and get around the libxml2 error via yum.
Simply install the gem via yum instead of the gem command:
su
yum search rubygem-nokogiri #this find the proper package name
yum install rubygem-nokogiri.i686
This helped me find the right answer for Fedora and, as I am using RVM for Ruby package management,
yum install rubygem-nokogiri
will pull in all the Ruby gems and dependencies into the system, not into my RVM environment, and in my experience that leads to a very frustrating and humbling experience.
So, taking your find of the Nokogiri yum gem you can use:
yum provides rubygem-nokogiri
and get a list of the dependencies for rubygem-Nokogiri which showed me the libraries that were missing. After that I ran:
yum install libxml2-devel libxslt libxslt-devel
Now Nokogiri compiles in Fedora and Nokogiri installs. D'oh!, we need the headers to compile Nokogiri from the devel libraries.
In Mac OS X (Mavericks) if none of these solutions work, try:
ARCHFLAGS="-arch x86_64" gem install nokogiri
or
ARCHFLAGS="-arch i386" gem install nokogiri
depending on your system's architecture.
You usually need development files for building gems. Try:
sudo apt-get install libxslt-dev libxml2-dev
(I just saw that Eric suggested the same in a comment.)
I was able to get this installed with Chocolatey, Windows 8.1 x64, and DevKit x64.
cinst libxml2
cinst libxslt
cinst libiconv
gem install nokogiri --
--with-xml2-include=C:\Chocolatey\lib\libxml2.2.7.8.7\build\native\include
--with-xml2-lib=C:\Chocolatey\lib\libxml2.redist.2.7.8.7\build\native\bin\v110\x64\Release\dynamic\cdecl
--with-iconv-include=C:\Chocolatey\lib\libiconv.1.14.0.11\build\native\include
--with-iconv-lib=C:\Chocolatey\lib\libiconv.redist.1.14.0.11\build\native\bin\v110\x64\Release\dynamic\cdecl
--with-xslt-include=C:\Chocolatey\lib\libxslt.1.1.28.0\build\native\include
--with-xslt-lib=C:\Chocolatey\lib\libxslt.redist.1.1.28.0\build\native\bin\v110\x64\Release\dynamic
You'll have to verify the version number in the paths are correct.
You may possibly need to add Microsoft's NuGet repository:
-Source "https://go.microsoft.com/fwlink/?LinkID=230477"
It will be:
sudo yum install -y libxml2 libxml2-devel
on RHEL servers.
At macOS none of above/below had really worked for me until I explicitly provided XCode libxml2 path to --with-xml2-include.
gem install nokogiri -- --with-xml2-include=/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX.sdk/usr/include/libxml2 --use-system-libraries
I was able to install Nokogiri 1.6.5 on Fedora 20 by doing:
export NOKOGIRI_USE_SYSTEM_LIBRARIES=true
Then running:
gem install nokogiri
For anyone else experiencing this issue, I solved it by running this command within the project directory
gem install nokogiri -- --use-system-libraries
Update: I ran into this again and tried just updating the gem which worked for me...
gem update nokogiri
Have you tried installing libxml2? Not from rubygems, but via the standard install process for your operating system. On Ubuntu/Debian for example:
sudo apt-get install libxml2
On any recent version of OS X it should already be installed.
For OSX users, if you've had success installing Nokogiri before, yet are getting errors installing it on, say, using a new version of Ruby that you've added and that error that includes a message like:
The compiler failed to generate an executable file. (RuntimeError)
You have to install development tools first.
This could be indicative of a XCode upgrade having happened via the App Store, either manually or automatically, and you not having opened it since that time.
If so, you should be able to open XCode, agree to the new license, and then install Nokogiri successfully.
On Mac OS X Yosemite my mistake was that I tried to use sudo gem install when it's a rule of thumb to not use superuser privileges when installing gems.
In my case it tried to modify the system installation of Ruby, and that's not a good idea. I installed rbenv, installed Ruby 2.2.2 thru it and set it as global, which is a term from rbenv's documentation. After that Nokogiri could install itself with a simple
gem install nokogiri
No hacks or workarounds were necessary, just a properly set environment; Nokogiri does the rest perfectly.
Was able to install vagrant-awe by following the above post but using the command as follow:
NOKOGIRI_USE_SYSTEM_LIBRARIES=1 vagrant plugin install vagrant-aws
For Windows x64:
gem inst nokogiri --pre --platform ruby
For more information check this thread: https://github.com/sparklemotion/nokogiri/issues/864
I was able to install Nokogiri by running the following packages:
$ dnf group install "C Development Tools and Libraries"
$ dnf install ruby-devel libxml2-devel patch
=== TLDR ===
As the instructions state, build Ruby with the latest clang compiler, or at least the same version that Rubygems will use to compile Nokogiri's native extensions libxml and libxsl.
If using RVM, building from source with the --with-ggc=clang flag was what did it for me:
rvm install 2.2 --with-gcc=clang
Replace 2.2 with whatever version you want. --with-gcc=clang ensures RVM builds from source and uses clang to do so; otherwise RVM may a pre-built binary Ruby, which is what tripped me up.
Then, install Nokogiri as normal using Bundler or Rubygems.
=== IN DEPTH ===
I struggled with this for a while. gem install nokogiri gave me:
checking for xmlParseDoc() in libxml/parser.h... no
checking for xmlParseDoc() in -lxml2... no
checking for xmlParseDoc() in -llibxml2... no
Digging into mkmf.log I saw:
conftest.c:15:27: error: too few arguments to function call, single argument 'cur' was not specified
int t(void) { xmlParseDoc(); return 0; }
Nokogiri supplies its own libxml and libxsl (as of 1.6.4). The signature defined in Nokogiri's local copy of parser.h (found under the gem install directory) is:
xmlParseDoc (const xmlChar *cur);
So I was at a loss as to how the method call in the hermetically sealed conftest.c file usage couldn't match up with the header file for parser.h.
When I realized I had probably installed a binary Ruby I removed and reinstalled using --with-gcc=clang (to force compilation and use clang) and the problem was solved:
rvm uninstall 2.2
rvm install 2.2 --with-gcc=clang
gem install nokogiri
I'm not exactly sure why that works as the system libxml header /usr/include/libxml2/libxml/parser.h has the same signature as Nokogiri's local copy.
It's weird, but it worked. Just make sure you compile a Ruby with clang.
gem install nokogiri -- --with-xml2-include=/usr/local/Cellar/libxml2/2.7.8/include/libxml2 --with-xml2-lib=/usr/local/Cellar/libxml2/2.7.8/lib --with-xslt-dir=/usr/local/Cellar/libxslt/1.1.26 --with-iconv-include=/usr/local/Cellar/libiconv/1.14/include --with-iconv-lib=/usr/local/Cellar/libiconv/1.14/lib
Change your version with it.
I am getting the following error:
$script/console
Loading development environment (Rails 2.2.2)
/opt/ruby-enterprise-1.8.6-20080709/lib/ruby/1.8/irb/completion.rb:10:in `require': no such file to load -- readline (LoadError)
Where can i get the file and what directory should it go in?
Thanks!
The readline module is normally part of the Ruby package itself.
Did you manually build your Ruby install? If so, you want to make sure libreadline and its headers are installed, and build again.
On Debian/Ubuntu:
apt-get install libreadline-dev
Or on RHEL/CentOS, try
yum install readline-devel
Update:
You are using a very old release of Ubuntu. If you want to keep using it, open /etc/apt/sources.list in a text editor, and change all occurrences of archive.ubuntu.com to old-releases.ubuntu.com. Then, run apt-get update and try the above again.
I urge you to consider updating your installation, though. Ubuntu 7.10 hasn't seen security updates in quite a while, and using it in production is not recommended. Even if it's not a production machine, there's a good chance you'll run into further problems because of old versions of certain libraries/dependencies.
You need to install the ncurses and readline libraries.
On Ubunutu you could do
sudo apt-get install libreadline5-dev libncurses5-dev
and then you will have to recompile readline which comes with your ruby source
cd <ruby-src-dir>/ext/readline
ruby extconf.rb
make
sudo make install
If you are using RVM you could simply do
rvm package install readline
EDIT:
On newer RVM versions, this last command is
rvm pkg install readline
Add the following line to your Gemfile and run bundle update
gem 'rb-readline'
credits to similar question/answer at install ruby 1.9.3 using rvm on ubuntu
This easiest way to get relief from this problem,
just add to your Gemfile:
gem 'rb-readline'
And then run bundle install
Run the command
rvm requirements
It shows the requirements and dependencies. Install those and reinstall the ruby on rvm
rvm remove 1.9.2
rvm install 1.9.2
It works!
EDIT
If you can't find the requirements option update your rvm.
rvm update --head # older rvm
or use rvm upgrade
Maybe this is a bullshit answer, but I ran into this problem today after upgrading postgres from 9.5.3 to 9.6, along with which homebrew upgraded readline from 6.something to 7. I ended up rolling back my postgres to 9.5.3 and that resolved the issue.