I'm creating an app that loads an sniffing-based database from one site, and all of this is done by "onlineSetup" method.
Since this method could be stuck for a while, I would like to set a statusText as "Connecting" so the user knows he has to wait. The problem is: the 'setTitle' is ignored until the method onlineSetup returns, even if the onlineSetup method is called after.
- (void)modeSwitchChanged:(id)sender
{
if (self.modeSwitch.isOn)
{
[self setStatusText:#"Buscando dados: YokaiAnimes" withColor:[UIColor blackColor]];
if ([self.db onlineSetup]) [self setStatusText:[NSString stringWithFormat:#"Animes encontrados: %d",self.db.animes.count] withColor:[UIColor greenColor]];
else
{
[self.db offlineSetup];
[self setStatusText:#"Falha: internte desconectada." withColor:[UIColor grayColor]];
[self.modeSwitch setOn:false animated:true];
}
}
else
{
[self.mainTableView setBackgroundColor:[UIColor whiteColor]];
[self setStatusText:#"Buscando dados: Memória Interna" withColor:[UIColor blackColor]];
[self.db offlineSetup];
[self setStatusText:[NSString stringWithFormat:#"Animes encontrados: %d",self.db.animes.count] withColor:[UIColor redColor]];
}
[self.mainTableView reloadData];
}
- (void)setStatusText:(NSString*)t withColor:(UIColor*)c
{
[self.statusLabel setTitle:t];
[self.statusLabel setTitleTextAttributes:[NSDictionary dictionaryWithObjectsAndKeys:c,NSForegroundColorAttributeName, nil] forState:UIControlStateNormal];
}
Nothing happens in the interface until after all your code finishes running. That's how iOS works. Thus if you want your change in the interface to happen now, you need to get off the main thread for a moment to let the runloop finish cycling before you proceed.
- (void)modeSwitchChanged:(id)sender {
if (self.modeSwitch.isOn) {
[self setStatusText:#"Buscando dados: YokaiAnimes" withColor:[UIColor blackColor]];
dispatch_async(dispatch_get_main_queue(), ^{
// call onlineSetup here
});
// ...
Indeed, if onlineSetup is truly time-consuming, you should to it on a background thread (not dispatch_get_main_queue()), because if you hog the main thread for too long, you will be punished with instant death (well, your app will, anyway). But then of course ultimately you must get back on the main thread to make any further changes to the interface. This is why GCD is so great; it makes this kind of thread-switching easy and safe.
In fact, if you are doing networking, you should definitely be using asynchronous networking. The ability to do this is built right into iOS; if you are deliberately doing synchronous networking, stop right now and fix that. You get a callback at the end and you can get back on the main thread at that point.
Hello I have a memory issue in my iPad app. Each time I change from a view to another view (this transition is made with segues), the app is increasing the memory used and never releases the memory. It is always increasing the memory used.
Let's see an example:
I am in my first view "home" which has these lines in viewDidLoad and viewDidAppear
(void)viewDidLoad
{
[super viewDidLoad];
self.view.backgroundColor = [UIColor colorWithPatternImage:[UIImage imageNamed:#"background.png"]];
[self initializeHomeDataSources];
DateService* dateService = [[DateService alloc] init];
self.currentDate = [dateService today];
[self checkHomeStatus];
[self showEmptyHomeViews];
[self setUpFonts];
}
and this my view did appear method
- (void)viewDidAppear:(BOOL)animated
{
[super viewDidAppear:animated];
_homeAutomaticUpdate = YES;
//This is a Thread
[NSThread detachNewThreadSelector:#selector(automaticHome) toTarget:self withObject:nil];
[self.phrasesView startPhrasesThread];
if ([InternetService internetConnection]) {
[self synchronizeHome];
}
if (self.scheduleDataSource.currentEvent) {
[self loadMessagesFor:self.homeDataSource.currentEvent];
[self loadLibraryFor:self.homeDataSource.currentEvent];
} else {
[self loadLibrary];
}
}
- (void)viewDidDisappear:(BOOL)animated
{
[super viewDidDisappear:animated];
_homeAutomaticUpdate = NO;
}
All the IBOutlet's are defined as (nonatomic, strong).
Each time the HomeView is loaded the memory increases it's quantity and I don't know what is happening.
Can anybody help me here? This problem is causing me consternation.
I'm guessing that you're going "backwards" to previous controllers using segues. Is that true? If so, that's your problem -- unless you use an unwind segue, you should never go backwards using segues because they always instantiate new controllers. So, when going back to previous controllers, either use an unwind, or use code that reverses your forward segues -- that is, popViewControllerAnimated: if the forward segue was a push, and dismissViewControllerAnimated:completion: if the segue was a modal.
Few questions:
Is your app killed after a while, because of memory usage?
Why you are creating new thread in -viewDidAppear?
Have you tried to simulate memory warning?
(In simulator: Hardware -> Simulate Memory Warning or Shift + CMD + M)
Does the memory gets down after memory warning or not?
This is not a whole answer for your question but your outlets must be weak unless their not top level objects.
All the IBOutlet's used should be (nonatomic, weak). Try this out..
I have an app that makes web service calls to obtain data. I want to add an activity indicator that is visible when the app is fetching web service data. I have looked into other posts, and though I believe I am doing as the posts recommend, my indicator does not render on the screen. The object that makes the web service call is stateGauges. Here is my code:
- (void)viewDidLoad
{
[super viewDidLoad];
UIActivityIndicatorView *activityStatus = [[UIActivityIndicatorView alloc] initWithFrame:CGRectMake(120, 230, 50, 50)];
activityStatus.center = self.view.center;
[self.view addSubview:activityStatus];
[activityStatus bringSubviewToFront:self.view];
[UIApplication sharedApplication].networkActivityIndicatorVisible = TRUE;
[activityStatus startAnimating];
stateGauges = [[GaugeList alloc] initWithStateIdentifier:stateIdentifier andType:nil];
[activityStatus stopAnimating];
}
Any suggestions? Thanks! V
Your problem is that your animation start is blocked by whatever you're doing in your GuagesList initializer.
When you tell the activity indicator to start animating, it doesn't immediately render to the screen but rather flags the view as needing an update on the next turn of the run loop. Your initializer then blocks the thread until its done, you call stopAnimating, and then the thread has a chance to update the indicator. By which point its already set to not animate.
The best solution is to perform your initializer on another thread using GCD. And be sure to switch back to the foreground thread before calling stopAnimating.
The usual pattern is do something like:
[activityStatus startAnimating];
// enqueue it
dispatch_async(dispatch_get_global_queue(DISPATCH_QUEUE_PRIORITY_BACKGROUND, 0), ^{
stateGauges = [[GaugeList alloc] initWithStateIdentifier:stateIdentifier andType:nil];
// now switch back to main thread
dispatch_async(dispatch_get_main_queue(), ^{
[activityStatus stopAnimating];
});
});
You'll want to verify the code as I had to type this from memory on a Windows machine.
take out
[activityStatus bringSubviewToFront:self.view];
because according to the docs bringSubviewToFront:
Moves the specified subview so that it appears on top of its siblings.
which isn't what you want. (another answer suggested you do [self.view bringSubviewToFront:activityStatus] instead.. that's fine, but generally this call is redundant, b/c
[self.view addSubview:activityStatus] adds the activityStatus to the end of the views in the self.view subviews array anyways)
if that still don't work.. basically put a break point right after you start animating, then type this into the console:
[[activityStatus superview] recursiveDescription]
recursiveDescription will give you a UI tree graph and basically tell you exactly where the activityIndicator view is.. you may have made an incorrect assumption about something.
Change
[activityStatus bringSubviewToFront:self.view];
To
[self.view bringSubviewToFront:activityStatus];
I'm using the UIRefreshControl for the first time and I get an exception during the loading of my refresh control.
Here is my declaration :
self.refreshControl = [[UIRefreshControl alloc] init];
self.refreshControl.tintColor = [UIColor grayColor];
[self.refreshControl addTarget:self action:#selector(refreshView:) forControlEvents:UIControlEventValueChanged];
[self.actualitesTableView addSubview:self.refreshControl];
Here are my functions :
- (void)refreshView:(UIRefreshControl *)sender {
[self performSelectorInBackground:#selector(threadAction) withObject:nil];
}
- (void)threadAction {
[self choixMAJ];
NSLog(#"OK1");
[self.refreshControl endRefreshing];
NSLog(#"OK2");
}
When I use the choixMAJ() method, it works perfectly.
Everything's going right and the OK2 is logged but after that, when the refresh control disapeared, the app crashed with this error :
*** -[__NSArrayM removeObject:]: message sent to deallocated instance 0x655a1a0
I don't understand why.. Any ideas ?
Well, you shouldn't call -endRefreshing on a background thread, for starters. UIKit methods (including that one) should be performed on the main thread. I'm not sure that's actually causing your problem, though.
Thanks shusta, it helps me a lot !
The answer here is correct, and to work around this i did the following.
I setup a timer in the main thread which monitored for a boolean. When you are ready to stop the refresher... set that boolean to true in your sub-thread. The timer will see that and call the endRefreshing function from the main thread.
If you are an advanced user of drawRect, you will know that of course drawRect will not actually run until "all processing is finished."
setNeedsDisplay flags a view as invalidated and the OS, and basically waits until all processing is done. This can be infuriating in the common situation where you want to have:
a view controller 1
starts some function 2
which incrementally 3
creates a more and more complicated artwork and 4
at each step, you setNeedsDisplay (wrong!) 5
until all the work is done 6
Of course, when you do the above 1-6, all that happens is that drawRect is run once only after step 6.
Your goal is for the view to be refreshed at point 5. What to do?
If I understand your question correctly, there is a simple solution to this. During your long-running routine you need to tell the current runloop to process for a single iteration (or more, of the runloop) at certain points in your own processing. e.g, when you want to update the display. Any views with dirty update regions will have their drawRect: methods called when you run the runloop.
To tell the current runloop to process for one iteration (and then return to you...):
[[NSRunLoop currentRunLoop] runMode: NSDefaultRunLoopMode beforeDate: [NSDate date]];
Here's an example of an (inefficient) long running routine with a corresponding drawRect - each in the context of a custom UIView:
- (void) longRunningRoutine:(id)sender
{
srand( time( NULL ) );
CGFloat x = 0;
CGFloat y = 0;
[_path moveToPoint: CGPointMake(0, 0)];
for ( int j = 0 ; j < 1000 ; j++ )
{
x = 0;
y = (CGFloat)(rand() % (int)self.bounds.size.height);
[_path addLineToPoint: CGPointMake( x, y)];
y = 0;
x = (CGFloat)(rand() % (int)self.bounds.size.width);
[_path addLineToPoint: CGPointMake( x, y)];
x = self.bounds.size.width;
y = (CGFloat)(rand() % (int)self.bounds.size.height);
[_path addLineToPoint: CGPointMake( x, y)];
y = self.bounds.size.height;
x = (CGFloat)(rand() % (int)self.bounds.size.width);
[_path addLineToPoint: CGPointMake( x, y)];
[self setNeedsDisplay];
[[NSRunLoop currentRunLoop] runMode: NSDefaultRunLoopMode beforeDate: [NSDate date]];
}
[_path removeAllPoints];
}
- (void) drawRect:(CGRect)rect
{
CGContextRef ctx = UIGraphicsGetCurrentContext();
CGContextSetFillColorWithColor( ctx, [UIColor blueColor].CGColor );
CGContextFillRect( ctx, rect);
CGContextSetStrokeColorWithColor( ctx, [UIColor whiteColor].CGColor );
[_path stroke];
}
And here is a fully working sample demonstrating this technique.
With some tweaking you can probably adjust this to make the rest of the UI (i.e. user-input) responsive as well.
Update (caveat for using this technique)
I just want to say that I agree with much of the feedback from others here saying this solution (calling runMode: to force a call to drawRect:) isn't necessarily a great idea. I've answered this question with what I feel is a factual "here's how" answer to the stated question, and I am not intending to promote this as "correct" architecture. Also, I'm not saying there might not be other (better?) ways to achieve the same effect - certainly there may be other approaches that I wasn't aware of.
Update (response to the Joe's sample code and performance question)
The performance slowdown you're seeing is the overhead of running the runloop on each iteration of your drawing code, which includes rendering the layer to the screen as well as all of the other processing the runloop does such as input gathering and processing.
One option might be to invoke the runloop less frequently.
Another option might be to optimize your drawing code. As it stands (and I don't know if this is your actual app, or just your sample...) there are a handful of things you could do to make it faster. The first thing I would do is move all the UIGraphicsGet/Save/Restore code outside the loop.
From an architectural standpoint however, I would highly recommend considering some of the other approaches mentioned here. I see no reason why you can't structure your drawing to happen on a background thread (algorithm unchanged), and use a timer or other mechanism to signal the main thread to update it's UI on some frequency until the drawing is complete. I think most of the folks who've participated in the discussion would agree that this would be the "correct" approach.
Updates to the user interface happen at the end of the current pass through the run loop. These updates are performed on the main thread, so anything that runs for a long time in the main thread (lengthy calculations, etc.) will prevent the interface updates from being started. Additionally, anything that runs for a while on the main thread will also cause your touch handling to be unresponsive.
This means that there is no way to "force" a UI refresh to occur from some other point in a process running on the main thread. The previous statement is not entirely correct, as Tom's answer shows. You can allow the run loop to come to completion in the middle of operations performed on the main thread. However, this still may reduce the responsiveness of your application.
In general, it is recommended that you move anything that takes a while to perform to a background thread so that the user interface can remain responsive. However, any updates you wish to perform to the UI need to be done back on the main thread.
Perhaps the easiest way to do this under Snow Leopard and iOS 4.0+ is to use blocks, like in the following rudimentary sample:
dispatch_queue_t main_queue = dispatch_get_main_queue();
dispatch_async(queue, ^{
// Do some work
dispatch_async(main_queue, ^{
// Update the UI
});
});
The Do some work part of the above could be a lengthy calculation, or an operation that loops over multiple values. In this example, the UI is only updated at the end of the operation, but if you wanted continuous progress tracking in your UI, you could place the dispatch to the main queue where ever you needed a UI update to be performed.
For older OS versions, you can break off a background thread manually or through an NSOperation. For manual background threading, you can use
[NSThread detachNewThreadSelector:#selector(doWork) toTarget:self withObject:nil];
or
[self performSelectorInBackground:#selector(doWork) withObject:nil];
and then to update the UI you can use
[self performSelectorOnMainThread:#selector(updateProgress) withObject:nil waitUntilDone:NO];
Note that I've found the NO argument in the previous method to be needed to get constant UI updates while dealing with a continuous progress bar.
This sample application I created for my class illustrates how to use both NSOperations and queues for performing background work and then updating the UI when done. Also, my Molecules application uses background threads for processing new structures, with a status bar that is updated as this progresses. You can download the source code to see how I achieved this.
You can do this repeatedly in a loop and it'll work fine, no threads, no messing with the runloop, etc.
[CATransaction begin];
// modify view or views
[view setNeedsDisplay];
[CATransaction commit];
If there is an implicit transaction already in place prior to the loop you need to commit that with [CATransaction commit] before this will work.
In order to get drawRect called the soonest (which is not necessarily immediately, as the OS may still wait until, for instance, the next hardware display refresh, etc.), an app should idle it's UI run loop as soon as possible, by exiting any and all methods in the UI thread, and for a non-zero amount of time.
You can either do this in the main thread by chopping any processing that takes more than an animation frame time into shorter chunks and scheduling continuing work only after a short delay (so drawRect might run in the gaps), or by doing the processing in a background thread, with a periodic call to performSelectorOnMainThread to do a setNeedsDisplay at some reasonable animation frame rate.
A non-OpenGL method to update the display near immediately (which means at the very next hardware display refresh or three) is by swapping visible CALayer contents with an image or CGBitmap that you have drawn into. An app can do Quartz drawing into a Core Graphics bitmap at pretty much at any time.
New added answer:
Please see Brad Larson's comments below and Christopher Lloyd's comment on another answer here as the hint leading towards this solution.
[ CATransaction flush ];
will cause drawRect to be called on views on which a setNeedsDisplay request has been done, even if the flush is done from inside a method that is blocking the UI run loop.
Note that, when blocking the UI thread, a Core Animation flush is required to update changing CALayer contents as well. So, for animating graphic content to show progress, these may both end up being forms of the same thing.
New added note to new added answer above:
Do not flush faster than your drawRect or animation drawing can complete, as this might queue up flushes, causing weird animation effects.
Without questioning the wisdom of this (which you ought to do), you can do:
[myView setNeedsDisplay];
[[myView layer] displayIfNeeded];
-setNeedsDisplay will mark the view as needing to be redrawn.
-displayIfNeeded will force the view's backing layer to redraw, but only if it has been marked as needing to be displayed.
I will emphasize, however, that your question is indicative of an architecture that could use some re-working. In all but exceptionally rare cases, you should never need to or want to force a view to redraw immediately. UIKit with not built with that use-case in mind, and if it works, consider yourself lucky.
Have you tried doing the heavy processing on a secondary thread and calling back to the main thread to schedule view updates? NSOperationQueue makes this sort of thing pretty easy.
Sample code that takes an array of NSURLs as input and asynchronously downloads them all, notifying the main thread as each of them is finished and saved.
- (void)fetchImageWithURLs:(NSArray *)urlArray {
[self.retriveAvatarQueue cancelAllOperations];
self.retriveAvatarQueue = nil;
NSOperationQueue *opQueue = [[NSOperationQueue alloc] init];
for (NSUInteger i=0; i<[urlArray count]; i++) {
NSURL *url = [urlArray objectAtIndex:i];
NSInvocation *inv = [NSInvocation invocationWithMethodSignature:[self methodSignatureForSelector:#selector(cacheImageWithIndex:andURL:)]];
[inv setTarget:self];
[inv setSelector:#selector(cacheImageWithIndex:andURL:)];
[inv setArgument:&i atIndex:2];
[inv setArgument:&url atIndex:3];
NSInvocationOperation *invOp = [[NSInvocationOperation alloc] initWithInvocation:inv];
[opQueue addOperation:invOp];
[invOp release];
}
self.retriveAvatarQueue = opQueue;
[opQueue release];
}
- (void)cacheImageWithIndex:(NSUInteger)index andURL:(NSURL *)url {
NSData *imageData = [NSData dataWithContentsOfURL:url];
NSFileManager *fileManager = [NSFileManager defaultManager];
NSString *filePath = PATH_FOR_IMG_AT_INDEX(index);
NSError *error = nil;
// Save the file
if (![fileManager createFileAtPath:filePath contents:imageData attributes:nil]) {
DLog(#"Error saving file at %#", filePath);
}
// Notifiy the main thread that our file is saved.
[self performSelectorOnMainThread:#selector(imageLoadedAtPath:) withObject:filePath waitUntilDone:NO];
}
I think, the most complete answer comes from the Jeffrey Sambell's blog post 'Asynchronous Operations in iOS with Grand Central Dispatch' and it worked for me!
It's basically the same solution as proposed by Brad above but fully explained in terms of OSX/IOS concurrency model.
The dispatch_get_current_queue function will return the current queue
from which the block is dispatched and the dispatch_get_main_queue
function will return the main queue where your UI is running.
The dispatch_get_main_queue function is very useful for updating the
iOS app’s UI as UIKit methods are not thread safe (with a few
exceptions) so any calls you make to update UI elements must always be
done from the main queue.
A typical GCD call would look something like this:
// Doing something on the main thread
dispatch_queue_t myQueue = dispatch_queue_create("My Queue",NULL);
dispatch_async(myQueue, ^{
// Perform long running process
dispatch_async(dispatch_get_main_queue(), ^{
// Update the UI
});
});
// Continue doing other stuff on the
// main thread while process is running.
And here goes my working example (iOS 6+). It displays frames of a stored video using the AVAssetReader class:
//...prepare the AVAssetReader* asset_reader earlier and start reading frames now:
[asset_reader startReading];
dispatch_queue_t readerQueue = dispatch_queue_create("Reader Queue", NULL);
dispatch_async(readerQueue, ^{
CMSampleBufferRef buffer;
while ( [asset_reader status]==AVAssetReaderStatusReading )
{
buffer = [asset_reader_output copyNextSampleBuffer];
if (buffer!=nil)
{
//The point is here: to use the main queue for actual UI operations
dispatch_async(dispatch_get_main_queue(), ^{
// Update the UI using the AVCaptureVideoDataOutputSampleBufferDelegate style function
[self captureOutput:nil didOutputSampleBuffer:buffer fromConnection:nil];
CFRelease (buffer);
});
}
}
});
The first part of this sample may be found here in Damian's answer.
I'd like to offer a clean solution to the given problem.
I agree with other posters that in an ideal situation all the heavy lifting should be done in a background thread, however there are times when this simply isn't possible because the time consuming part requires lots of accessing to non thread-safe methods such as those offered by UIKit. In my case, initialising my UI is time consuming and there's nothing I can run in the background, so my best option is to update a progress bar during the init.
However, once we think in terms of the ideal GCD approach, the solution is actually a simple. We do all the work in a background thread, dividing it into chucks that are called synchronously on the main thread. The run loop will be run for each chuck, updating the UI and any progress bars etc.
- (void)myInit
{
// Start the work in a background thread.
dispatch_async(dispatch_get_global_queue(0, 0), ^{
// Back to the main thread for a chunk of code
dispatch_sync(dispatch_get_main_queue(), ^{
...
// Update progress bar
self.progressIndicator.progress = ...:
});
// Next chunk
dispatch_sync(dispatch_get_main_queue(), ^{
...
// Update progress bar
self.progressIndicator.progress = ...:
});
...
});
}
Of course, this is essentially the same as Brad's technique, but his answer doesn't quite address the issue at hand - that of running a lot of non thread safe code while updating the UI periodically.
Joe -- if you are willing to set it up so that your lengthy processing all happens inside of drawRect, you can make it work. I just wrote a test project. It works. See code below.
LengthyComputationTestAppDelegate.h:
#import <UIKit/UIKit.h>
#interface LengthyComputationTestAppDelegate : NSObject <UIApplicationDelegate> {
UIWindow *window;
}
#property (nonatomic, retain) IBOutlet UIWindow *window;
#end
LengthComputationTestAppDelegate.m:
#import "LengthyComputationTestAppDelegate.h"
#import "Incrementer.h"
#import "IncrementerProgressView.h"
#implementation LengthyComputationTestAppDelegate
#synthesize window;
#pragma mark -
#pragma mark Application lifecycle
- (BOOL)application:(UIApplication *)application didFinishLaunchingWithOptions:(NSDictionary *)launchOptions {
// Override point for customization after application launch.
IncrementerProgressView *ipv = [[IncrementerProgressView alloc]initWithFrame:self.window.bounds];
[self.window addSubview:ipv];
[ipv release];
[self.window makeKeyAndVisible];
return YES;
}
Incrementer.h:
#import <Foundation/Foundation.h>
//singleton object
#interface Incrementer : NSObject {
NSUInteger theInteger_;
}
#property (nonatomic) NSUInteger theInteger;
+(Incrementer *) sharedIncrementer;
-(NSUInteger) incrementForTimeInterval: (NSTimeInterval) timeInterval;
-(BOOL) finishedIncrementing;
incrementer.m:
#import "Incrementer.h"
#implementation Incrementer
#synthesize theInteger = theInteger_;
static Incrementer *inc = nil;
-(void) increment {
theInteger_++;
}
-(BOOL) finishedIncrementing {
return (theInteger_>=100000000);
}
-(NSUInteger) incrementForTimeInterval: (NSTimeInterval) timeInterval {
NSTimeInterval negativeTimeInterval = -1*timeInterval;
NSDate *startDate = [NSDate date];
while (!([self finishedIncrementing]) && [startDate timeIntervalSinceNow] > negativeTimeInterval)
[self increment];
return self.theInteger;
}
-(id) init {
if (self = [super init]) {
self.theInteger = 0;
}
return self;
}
#pragma mark --
#pragma mark singleton object methods
+ (Incrementer *) sharedIncrementer {
#synchronized(self) {
if (inc == nil) {
inc = [[Incrementer alloc]init];
}
}
return inc;
}
+ (id)allocWithZone:(NSZone *)zone {
#synchronized(self) {
if (inc == nil) {
inc = [super allocWithZone:zone];
return inc; // assignment and return on first allocation
}
}
return nil; // on subsequent allocation attempts return nil
}
- (id)copyWithZone:(NSZone *)zone
{
return self;
}
- (id)retain {
return self;
}
- (unsigned)retainCount {
return UINT_MAX; // denotes an object that cannot be released
}
- (void)release {
//do nothing
}
- (id)autorelease {
return self;
}
#end
IncrementerProgressView.m:
#import "IncrementerProgressView.h"
#implementation IncrementerProgressView
#synthesize progressLabel = progressLabel_;
#synthesize nextUpdateTimer = nextUpdateTimer_;
-(id) initWithFrame:(CGRect)frame {
if (self = [super initWithFrame: frame]) {
progressLabel_ = [[UILabel alloc]initWithFrame:CGRectMake(20, 40, 300, 30)];
progressLabel_.font = [UIFont systemFontOfSize:26];
progressLabel_.adjustsFontSizeToFitWidth = YES;
progressLabel_.textColor = [UIColor blackColor];
[self addSubview:progressLabel_];
}
return self;
}
-(void) drawRect:(CGRect)rect {
[self.nextUpdateTimer invalidate];
Incrementer *shared = [Incrementer sharedIncrementer];
NSUInteger progress = [shared incrementForTimeInterval: 0.1];
self.progressLabel.text = [NSString stringWithFormat:#"Increments performed: %d", progress];
if (![shared finishedIncrementing])
self.nextUpdateTimer = [NSTimer scheduledTimerWithTimeInterval:0. target:self selector:(#selector(setNeedsDisplay)) userInfo:nil repeats:NO];
}
- (void)dealloc {
[super dealloc];
}
#end
Regarding the original issue:
In a word, you can (A) background the large painting, and call to the foreground for UI updates or (B) arguably controversially there are four 'immediate' methods suggested that do not use a background process. For the result of what works, run the demo program. It has #defines for all five methods.
Alternately per Tom Swift
Tom Swift has explained the amazing idea of quite simply manipulating the run loop. Here's how you trigger the run loop:
[[NSRunLoop currentRunLoop] runMode: NSDefaultRunLoopMode beforeDate: [NSDate date]];
This is a truly amazing piece of engineering. Of course one should be extremely careful when manipulating the run loop and as many pointed out this approach is strictly for experts.
However, a bizarre problem arises ...
Even though a number of the methods work, they don't actually "work" because there is a bizarre progressive-slow-down artifact you will see clearly in the demo.
Scroll to the 'answer' I pasted in below, showing the console output - you can see how it progressively slows.
Here's the new SO question:
Mysterious "progressive slowing" problem in run loop / drawRect
Here is V2 of the demo app...
http://www.fileswap.com/dl/p8lU3gAi/stepwiseDrawingV2.zip.html
You will see it tests all five methods,
#ifdef TOMSWIFTMETHOD
[self setNeedsDisplay];
[[NSRunLoop currentRunLoop]
runMode:NSDefaultRunLoopMode beforeDate:[NSDate date]];
#endif
#ifdef HOTPAW
[self setNeedsDisplay];
[CATransaction flush];
#endif
#ifdef LLOYDMETHOD
[CATransaction begin];
[self setNeedsDisplay];
[CATransaction commit];
#endif
#ifdef DDLONG
[self setNeedsDisplay];
[[self layer] displayIfNeeded];
#endif
#ifdef BACKGROUNDMETHOD
// here, the painting is being done in the bg, we have been
// called here in the foreground to inval
[self setNeedsDisplay];
#endif
You can see for yourself which methods work and which do not.
you can see the bizarre "progressive-slow-down". Why does it happen?
you can see with the controversial TOMSWIFT method, there is actually no problem at all with responsiveness. tap for response at any time (but still the bizarre "progressive-slow-down" problem)
So the overwhelming thing is this weird "progressive-slow-down": on each iteration, for unknown reasons, the time taken for a loop decreases. Note that this applies to both doing it "properly" (background look) or using one of the 'immediate' methods.
Practical solutions?
For anyone reading in the future, if you are actually unable to get this to work in production code because of the "mystery progressive slowdown", Felz and Void have each presented astounding solutions in the other specific question.