I am using Visual Studio Online. I have projects which have common code that I use across a number of different solutions in different TFS projects and I also have some files which are linked from other TFS projects in some of them. In order to be able to access them all, I've changed the Workspace config so that I have just mapped $/ to a particular folder.
The problem is that I just checked in a change in one project and noticed that it also checked in a change in a completely unrelated one that wasn't part of the solution at all! How can I configure things to be able to access everything that I need to without cross-checking-in files from unrelated projects (and without having to manually exclude/include files in every check in)!?
EDIT: I've noticed that this doesn't seem to have happened again on my last couple of check ins when I also had items from other projects checked out. Wondering what caused it.
You should look at a NuGet solution for this. If you are using VSO you can use the new MyGet integration with an automated build process. If you create an automated build for the shared project output that is packaged in a NuGet package you can create a NuGet repository ion MyGet to provide it to your other solutions.
Once you have that, if you then change the shared code and check in, the build and package will kick off and deploy your new version of the package. Your other solutions will then prompt you to update automatically. You don't even need to check in the dependent assemblies as you can use NuGet Package Restore to make sure your local and build server get the right versions.
It sounds like a lot of work but once you get up to speed it only takes a few hours of investment to configure for anything you want to share or deploy in this way.
In the Pending Changes section of Team Explorer, in the Included Changes section there is a drop down. If it's set to "Show All" you'll see changes pending for all your solutions. If it's set to "Show Solution Changes" you'll just see changes pending for the current solution. (My guess is that it was set to "Show All" when you checked in your changes and that's why you got changes from other solutions checked in.)
I'm trying to write a very lightweight "build" script which will basically just get a few files from TF (based on a Changeset number). Then I'll run those files in SQLCMD.
I'm using this:
tf.exe get c:\tfs\ /version:c2681 /force /recursive
However, this appears to get EVERYTHING, not just the files in changeset #2681. I'd like to be able to point it to the root of my tfs workspace, give it a changeset number, and have it just update those few specific files. Also, it appears to be getting older versions (perhaps what was current when changeset #2681 was checked in)?
Is there a way to get just those specific files, WITHOUT needing to call them out specifically in the tf get itemspec?
EDIT: I actually had to add the /force option in order for it to do anything at all. Without force, it doesn't appear to even retrieve from the server a file I deleted locally, that's definitely in the changeset.
thanks,
Sylvia
Everything mentioned in Jason's and Richard's posts above is correct but I would like to add one thing that may help you. The TFS team ships a set of useful tools separate from VS known as the "Team Foundation Power Tools". One of the Power Tools is an additional command line utility known as tfpt.exe. tfpt.exe contains a "getcs" command which is equivalent to "get changeset" which seems to be exactly what you are looking for.
If you have VS 2010, then you can download the tools here. If you have an older version, a bing :) search should help you find the correct version of the tools. If you want to read more about the getcs command, check out Buck Hodges's post here.
The TFS server keeps track of what each workspace contains1. Any changes made locally with non-TFS client commands (whether tf.exe, Team Explorer or another client) will lead to differences between the TFS Server's view and what actually exist.
The force options on the various clients just gets everything removing such inconsistencies (effectively resetting both what is on the client and what the server thinks is there).
When you perform a get against a specified version (whether date, changeset or label) you get everything up to and including that point in time, whether on not specifically changed at that point. So getting
tf get /version:D2012-03-30
will get changes made on or before that date.
To get only the items included in a changeset you'll have to do some work yourself, using a command to get a listing of the content of a changeset and parse that to perform the right actions (a changeset can include more than just updates and adds of files2).
It seems to me that if you want to perform a build at each changeset affecting a particular TFS folder you would be better off looking at using TFS Build which is all about doing exactly that – avoid reinventing the wheel – and focus on the build part (other continuous build solutions are available).
1 This will change with TFS11 local workspaces.
2 Eg. handing the rename of a folder will take some non-trivial work.
The command will get all the sources for the given changeset. By default it will only get the files that it thinks are different between your workspace and the server. However, by using the /force option you are asking it to get everything regardless of the state it thinks your workspace is in (which is much slower but has the benefit of ensuring your workspace is fully in sync with the server).
So just removing /force will probably achieve what you want.
edit
As I said above, tfs will get all files that it thinks are different from the server. If you manually delete a file from your local workspace, TFS won't know that it is missing from your local version, so it won't think it needs to update the file. There are three solutions to this:
Use /force to make sure things are in sync, and put up with it being very slow.
Don't modify files in your workspace with anything other than TFS tools (tf.exe, Visual Studio, TFS power tool for the explorer shell). You shouldn't just delete files on your local hard drive - if they really need to be deleted, then delete them in source control.
Go offline in TFS before you make changes manually. Then when you go online, TFS will search for all the changes you have made and add them to your pending changes so that TFS is aware of them.
I started work a lone developer last year and I found VSS is no longer a good option for source control so I decided to use TFS 2010 instead.
I have had to learn everything from a book - of which there are few.
I am currently creating a new build and in my workspaces I see a have 4. I want to delete one of them and rename another.
However I do not know what the consequences of doing this are. If I delete a workspace, will that remove the associated files under source control? How do I check which files these are? What happens if I change a status from active to cloaked?
As you can see, I am a beginner in all this.
Workspaces are only a mapping from SourceSontrol folders onto your local file system. Also workspace contains information about versions of the files you have locally, so when you hit 'Get Latest Version' only recent changes are sent from server to you, not the whole files. Information on what files are checked out is stored in workspace too, so if you have pending changes in the workspace and delete it then there'll be a bit of a challenge to check these changes in. Renaming of the workspace will not break anything as far as I know.
Article An introduction to TFS Workspaces may be interesting to you.
Like the others have said, the workspace only says what local files you have checked out, and the status, etc. Workspaces are pretty granulal (i.e. per user and per machine) so you could have mutliple workspaces with the same username in the same project. E.g. if you have a copy of Visual Studio at work and one at home, you could have different files checked out and you wouldn't run into any conflicts like you would have in VSS or something based on VSS Like like VSSConnect.
We've had a couple of people leave out project and have had to go in and remove their workspaces after the fact. This hasn't been a big deal in terms of any code losses but if you don't have access to the machine anymore you will have to use the TFS tools.
Try TFS Sidekicks, it provides a nice GUI to manage all the nitty-gritty back-end stuff in TFS
Why Why WHY doesn't TFS's get latest work consistently?
You would have thought that feature would have been tested thoroughly.
What I have to do is, get specific version, then check both overwrite writetable files + overwrite all files.
Is my local setup messed up or you do this also?
TFS redefined what "Get Latest" does. In TFS terms, Get Latest means get the latest version of the files, but ignore the ones that the server thinks is already in your workspace. Which to me and just about everyone else on the planet is wrong.
See this link: http://blogs.microsoft.co.il/blogs/srlteam/archive/2009/04/13/how-get-latest-version-really-works.aspx
The only way to get it to do what you want is to Get Specific Version, then check both of the "Overwrite ..." boxes.
Sometimes Get specific version even checking both checkboxes won't get you the latest file. You've probably made a change to a file, and want to undo those changes by re-getting the latest version. Well... that's what Undo pending changes is for and not the purpose of Get specific version.
If in doubt:
undo pending check in on the file(s)
do a compare afterwards to make sure your file matches the expected version
run a recursive 'compare' on your whole project afterwards to see what else is different
keep an eye on pending changes window and sometimes you may need to check 'take server version' to resolve an incompatible pending change
And this one's my favorite that I just discovered :
keep an eye out in the the Output window for messages such as this :
Warning - Unable to refresh R:\TFS-PROJECTS\www.example.com\ExampleMVC\Example MVC\Example MVC.csproj because you have a pending edit.
This critical message appears in the output window. No other notifications!
Nothing in pending changes and no other dialog message telling you that the file you just requested explicitly was not retrieved! And yes - you resolve this by just running Undo pending changes and getting the file.
TFS, like some other source control providers, such as Perforce, do this, as the system knows what the last version you successfully got was, so get latest turns into "get changes since x". If you play by its rules and actually check things out before editing them, you don't confuse matters, and "get latest" really does as it says.
As you've seen, you can force it to reassess everything, which has a much greater bandwidth usage, but behaves closer to how SourceSafe used to.
It's hard to respond to a statement without examples of how it's not working, but it's crucial to understand that TFVC (in "Server Workspace" mode, which was the mechanism prior to TFS 2012) does not examine the state of your local filesystem. TFVC Server Workspaces are a "checkout-edit-checkin" type of system where this is by-design, an intentional decision made to massively reduce the amount of file I/O required to determine the state of your workspace. Instead, the workspace information is saved on the server.
This allows TFVC Server Workspaces to scale to very large codebases very efficiently. If you are in a multi-gigabyte code base (like Visual Studio or the Windows source tree) then your client does not need to scan your local filesystem, looking for files that may have changed, because the contract you have with TFS is that you will explicitly check a file out when you want to edit it.
You are expected to not mark a file as write-only and change it without explicitly checking it out first. If you go down this route, then the server does not know that you have made changes to your file, and performing a "Get Latest" operation will not update your local workspace, because you haven't told the server that you've made changes.
If you do subvert this mechanism then you can use the tfpt reconcile command to examine your local workspace for changes that you have made locally.
If you find yourself using "Get Specific Version" and selecting the "force" and "overwrite" options, then it is very likely that you are in the habit of bypassing all of the enforcements that TFS has implemented to keep you from hurting yourself, and you should probably consider TFVC Local Workspaces.
TFVC Local Workspaces provide an "edit-merge-commit" type of version control system, which means that you do not need to explicitly check files out before editing them and they are not read-only on-disk. Instead, you simply need to edit the file, and your client will scan the filesystem, notice the change, and present this as a pending change.
TFVC Local Workspaces are recommended for small projects that do not require fine-grained permissions control, since they present a much nicer workflow. You are not required to be online, and you do not have to explicitly check files out before editing them.
TFVC Local Workspaces are the default in TFS 2012, and if they are not enabled for you, then you should ask your server administrator. (Organizations with very large codebases or strict auditing requirements may disable TFVC Local Workspaces.)
Eric Sink's excellent book Version Control By Example outlines the differences between checkout-edit-checkin and edit-merge-commit systems and when one is more appropriate than the other.
The Professional Team Foundation Server 2013 book also provides excellent information about the differences between TFVC Server Workspaces and TFVC Local Workspaces. The MSDN documentation and blogs also provide detailed information:
Decide between using a local or a server workspace
Server workspaces vs. local workspaces
Team Foundation Server – Trying to understand Server versus Local Workspaces
Team Foundation Server (TFS) keeps track of its local copy in a hidden directory called $TF.When you issue the "get Latest Version", TFS looks into this folder and see weather I have the latest copy or not. If it does it will not download the latest copy. It does not matter if you have the original file or not. In fact you might have deleted the entire folder (as in my case) and TFS won't fetch the latest copy because it does not look into the actual file but the hidden directory where it records changes. The flaw with this design is, anything done outside the system will not be recorded in TFS. For example, you may go into Windows explorer, delete a folder or file and TFS wont recognize it. It will be totally blind. At least I would expect there Windows would not let you delete this file but it does!
One way to enforce the latest copy is to delete the hidden $TF folder manually. To do that, go to command prompt and navigate to the root folder where you project was checked out and issue this command
rd/s $tf // remove $TF folder and everything inside it
If you want to just check the hidden folder, you can do it using
dir /ah // display hidden files and folders
Note: If you do it, the tf will think you do not have any local copy even though you have it in files and it will sync up everything again.
Caution: Use this method at your own risk. Please do not use it on critical work.
"Get latest version" by default will only download the files that have changed on the server since the last time you ran "Get latest version". TFS keeps track of the files you download so it doesn't spend time downloading the same version of the files again. If you are modifying the files outside of Visual Studio, this can cause the consistency problems it sounds like you are seeing.
Unfortunately, there has to be one or more bugs in TFS 2008, since this problem regularly crop up on developer machines and build servers where I work as well.
I can do Get Latest, I can see in the history list of the project that there have been commits after I last did a Get Latest, I have not touched the files on disk in any way, but after the "Get Latest" function has completed, when I check the TFS tab, some of the files still says that they're not the latest version.
Obviously TFS is able to determine that I have old files locally, since the list says so. Yet, Get Latest fails to do that, get the latest version. If I do what you did, use the Get Specific version, and check the two checkboxes at the bottom of the dialog, then the files are retrieved.
We changed our build servers to always use the Get Specific version type of function instead, so this part now works, but since our build server (TeamCity) also relies on checking if there have been changes to the files in order to kick off a build, sometimes it lapses into a "nothing changed, nothing to see here, move along" mode and does nothing until we forcibly run the build configuration.
Note that I have experienced this problem on a machine that is never touched, except for get latest + build, both manually, so there's nothing tampering with the files. It's just TFS getting confused.
One time this cropped up I verified that the files on disk was indeed binary identical to the version previously retrieved, so no manual tampering had been done with the files.
Also, I fail to see how TFS can "know" whether files have changed on disk or not without actually looking at the contents. If one part of TFS can see that the files are indeed not the latest version, then the Get Latest version should absolutely be able to get the latest version. This in reference to comments to other answers here.
It might because you are login TFS as the same user, and the workspace name (based on machine name by default) is also the same, so TFS thinks your are on the same machine and same workspace, thus you already have the latest version of the files, so it wont get them for you.
try rename your machine, and create a new workspace as a new machine.
Go with right click: Advanced > Get Specific Version. Select "Letest Version" and now, important, mark two checks:
The checks are:
Overwrite writeable files that are not checked
Overwrite all files even if the local version matches the specified version
WHen I run into this problem with it not getting latest and version mismatches I first do a "Get Specific Version" set it to changeset and put in 1. This will then remove all the files from your local workspace (for that project, folder, file, etc) and it will also have TFS update so that it knows you now have NO VERSION DOWNLOADED. You can then do a "Get Latest" and viola, you will actually have the latest
I had the same issue with Visual Studio 2012. No matter what I did, it didn't get the code from TFS source control.
In my case, the cause was mappings a folder + subfolder from the source control separately but to the same tree in my local HD.
The solution was removing the subfolder mapping using the "manage workspaces" window.
Most of the issues I've seen with developers complaining that Get Latest doesn't do what they expect stem from the fact that they're performing a Get Latest from Solution Explorer rather than from Source Control Explorer. Solution Explorer only gets the files that are part of the solution and ignores anything that may be required by files within the solution, and therefore part of source control, whereas Source Control explorer compares your local workspace against the repository on the server to determine which files are needed.
It could happen when you use TFS from two different machines with the same account, if so you should compare to see changed files and check out them then get latest then undo pending changes to remove checkout
This worked for me:
1. Exit Visual Studio
2. Open a command window and navigate to the folder: "%localappdata%\Local\Microsoft\Team Foundation\"
3. Navigate to the sub folders for every version and delete the sub folder "cache" and its contents
4. Restart Visual Studio and connect to TFS.
5. Test the Get Latest Version.
In my case, Get specific version, even checking both check boxes and undoing all pending changes didn't work.
Checked the work spaces. Edit current workspace. Check all paths.
The solution path was incorrect and was pointing to a deleted folder.
Fixed the path and get latest worked fine.
Every time this happens to me (so far) is because I have local edits pending on the .csproj project file. That file seems to keep a list of all the files included in the project. Any new files added by somebody else are "not downloaded" because they are not in my locally edited (now stale) project file. To get all the files I first have to undo pending changes to the .csproj file first then "get all". I do not have to undo other changes I have made, but I may have to go back and include my new files again (and then the next guy gets the same problem when he tries to "get all"...)
It seems to me there is some fundamental kludginess when multiple people are adding new files at the same time.
(this is in .Net Framework projects, maybe the other frameworks like Core behave differently)
just want to add TFS MSBuild does not support special characters on folders i.e. "#"
i had experienced in the past where one of our project folders named as External#Project1
we created a TFS Build definition to run a custom msbuild file then the workspace folder is not getting any contents at the External#Project1 folder during workspace get latest. It seems that tfs get is failing but does not show any error.
after some trial and error and renaming the folder to _Project1. voila we got files on the the folder (_Project1).
Tool:
TFS Power Tools
Source:
http://dennymichael.net/2013/03/19/tfs-scorch/
Command:
tfpt scorch /recursive /deletes C:\LocationOfWorkspaceOrFolder
This will bring up a dialog box that will ask you to Delete or Download a list of files. Select or Unselect the files accordingly and press ok. Appearance in Grid (CheckBox, FileName, FileAction, FilePath)
Cause:
TFS will only compare against items in the workspace. If alterations were made outside of the workspace TFS will be unaware of them.
Hopefully someone finds this useful. I found this post after deleting a handful of folders in varying locations. Not remembering which folders I deleted excluded the usual Force Get/Replace option I would have used.
I encountered the same problem:
My development server was corrupted and restored, but the information restored was from a few days ago.
TFS was updated that all the files are up to date, but in practice my files were correct a few days ago!
Nothing I did helped. get latest did not get the latest version.
At the end I got specific varision from a month ago. my files were updated accordingly, and then I did get latest.
And it worked. the files have been updated.
I have a Project on CodePlex which is using TFS and I am using the TFS Plugin for Visual Studio. Now I have copied this project and worked on another PC without TFS and done some refactoring. Foolishly, I have then just used copy/paste and manual text editing to merge my changes, expecting that TFS just picks up the changes.
Apparantly, that is not the case.
Here is a screenshot of my local directory:
My Local TFS http://img259.imageshack.us/img259/2897/tfslocal.jpg
Notice how some files are missing the lock symbol - those are missing. If you look at the current TFS Tree on Codeplex, there are some files which do not exist locally anymore, i.e. WikiPlexExtensions.cs in the main folder.
Is there any way to easily tell TFS to compare my local to the remote repository and pick up the changes? I could re-add the local files using "Exclude from local project" and re-adding them, and I could create the "deleted" files as empty files just to delete them, but if I can avoid the manual messing around that would be good as well :)
The easiest way is to exploit VS 2008's "online" feature. Basically you want to set your solution offline, then bring it online while connected to the proper Codeplex server. TFS should figure out the rest.
Feature overview: http://msdn.microsoft.com/en-us/teamsystem/bb898913.aspx
Tweaking the settings by hand: http://blogs.msdn.com/benryan/archive/2008/07/09/using-tfs-2008-power-tools-to-modify-server-s-offline-state.aspx
To compare local and server folders, you can check out TFS Power Tool. After installing it, you can bring up the source control explorer, right click on the server folder and then select 'Compare'. Folder difference window will display the differences. You can also right click on the differences to see available commands such as 'Get Latest' to update your local folder for example. Check out Bryan Harry's blog post on the power tool
I don't think there is an easy fix... What I've done in the past is back up those files that I have edited, then do a "Get Latest Version..." for the files I edited. This should change the files back to being read-only etc... Now, check out the files the regular way and paste the backups you had into the checked out files. Obviously this really only works when there are a couple of files you have edited.
TFS (in Visual Studio) has a "Reconcile" command for this, see Microsoft documentation, or this answer with steps.
BTW: This command may not haven been existing at time of original question, but this question came first when I was searching.