First I start the emulator.
Then I load dragon warrior ROM.
Then I try to access the lua script menu.
However fceux will not let me access the main menus anymore. I can only control the emulator.
What is the right way to run a Lua script in version 2.2.3?
The documentation below is obviously lacking. No window pops up. See the **** there is no run Lua script option.
The fceux docs say this:
To run a Lua script, choose "Run Lua Script" from where In the dialog that pops up, click "Browse" and find the file you wish to run. This will insert the path of this file into the dialog. You can then click on "Run" to run the script or "Cancel" to return to FCEUX without running the script.
To end a Lua script, choose "Stop Lua Script" from where.
You're reading documentation for the windows version and trying to apply it to the portable version. They aren't the same. Learn to use wine or virtualization and use the windows version.
If you insist in using the portable version, you can use --loadlua myfile.lua, assuming your fceux has been built with lua support (and who can say how it was built on linux or osx?)
I want SPSS to open a specific syntax-file when starting up. I have managed to open a blank syntax-file when starting up, by going to Edit -> Options and clicking on "Open syntax window at startup" in the General settings. However I'd like to start a specific syntax-file containing code I usually need.
Whether Mac or Windows, open a command (terminal on Mac) window. At the prompt, go the directory where you have installed SPSS (assuming it isn't on your PATH) and invoke the SPSS executable with the added command line argument of the file name. For example, on Windows:
C:\>CD \<path to SPSS>
stats C:\MyPath\MyFile.sps
on Mac:
cd /Applications/mypath/SPSSStatistics.app/Contents/MacOS
./stats /MyPath/MyFile.sps
You can do this with a syntax, SAV, or SPV file.
I am starting out Erlang in Win 7 64 bit box and I was able to use Erlang IDE just fine and since I am used to Eclipse I wanted to use Erlide with Eclipse. I am following running project document on erlide I was able to follow along. (Except step 41, Where it is talking about adding something to 'Main tab' and in my case it shows as 'Erlang', but options they are same) When I run the 'new configuration' on the HelloWorld example it runs and stuck at 57%.
I did install Erlang on my PC and installed it in a directory without space and it does shows up on my installed runtime in Eclipse.
When I run I do not see 'Eclipse IDE' like I saw when I was running Scala IDE in eclipse.
I did enter a dummy cookie name just in case if that is the problem
I tried running 'erl -name foo' to make sure node is able to run and it did.
Is there anything I need to check?
Thanks
Try first this:
* delete the configuration you created
* open a file in your project, right-click in it and choose Run as -> Erlang application
This will create a configuration that should work. You should see a console opening, where you can interact with the Erlang node.
If that is not happening, please go to window->preferences->erlang->report problem and create a report. Attach it to an issue at https://github.com/erlide/erlide/issues or send it to erlide_bugs#lists.sourceforge.net
I have the same problem on Win 7 - 64bit.
Problem: After some very first times build and run successfully, then eclipse couldnt run anymore. Restart Eclipse won't help.
Solution: Restarting the computer, and plz remember to Build Project before running it.
I'm ask/answering this question because it hung me up & it's likely someone else will have the same problem.
Install of RabbitMQ x64 v2.8.6 on Windows Server 2008 x64.
After Erlang install using default install location to C:\Program Files\erl5.9.2, I'm attempting to start the server via running the rabbitmq-service.bat. Fail:
Please either set ERLANG_HOME to point to your Erlang installation
or place the RabbitMQ server distribution in the Erlang lib folder.
Problem is the .bat file does not have the correct subpath. with 5.9.2 (R15B02) version of erlang. My ERLANG_HOME directory is set correctly, but the script does not use it correctly for this version of Erlang, which, it appears to this Erlang noob to have a new subdirectory called "erts-5.9.2" which is causing the problems. Maybe someone intimate with these scripts can describe how to make this work correctly without the hack workaround I'm about to describe?
1- Set environment variable:
Variable name : ERLANG_HOME
Variable value: C:\Program Files (x86)\erl6.4
note: don't include bin on above step.
2- Add %ERLANG_HOME%\bin to the PATH environmental variable:
Variable name : PATH
Variable value: %ERLANG_HOME%\bin
This works well.
There are several RabbitMQ control .bat files on windows. Every one you use needs to get changed to reflect the Erlang path correctly. In this example, I'm editing the rabbitmq-server.bat because it's one of the easier ones... any of the .bat files you want to run will need this hack to get them to work, with the rabbitmq_service.bat file being the most involved to adjust.
editing that rabbitmq_server.bat file, you can see on about line 48 or so there's a check to see if the erl.exe is found, but the path isn't correct:
if not exist "!ERLANG_HOME!\bin\erl.exe" (
that path does not match the file structure for the 5.9.2 version of Erlang. I fixed this by simply removing this path check from about line 48 to 58, then, where the .bat actually makes a call to the erl.exe on about line 129 which reads:
"!ERLANG_HOME!\bin\erl.exe"
I simply hardcoded the path to my erl.exe:
"C:\Program Files\erl5.9.2\erts-5.9.2\bin\erl.exe"
With the pathing correct, the rabbitmq .bat files will run.
I had the similar issue, modifying ERLANG_HOME in .bat files did not work. Then I tried echo %ERLANG_HOME% in command prompt, that did not print the environment variable value(I could see that ERLANG_HOME environment variable has been created under advance system settings), that lead me to believe that I need to restart server for 64 bit installation of Erlang. After rebooting server, It worked like a charm. I hope this helps someone.
Just to share an up-to-date answer as of 2019: On Windows Server 2019, after setting up the environment variable, a restart is required to solve the problem.
I got into same kind of problem.
I solved it by doing three changes as given below.
Update Path variable "ERLANG_HOME" : "C:\Program Files\erl8.0" in Environment Variables.
Upadte "Path" variable "Path" : ";%ERLANG_HOME%\bin;"
Give urself FULL CONTROL permissions over "Program Files" in C drive.
It worked for me in this way.
This problem still occurs in Erlang 18.3 (erl7.3) and RabbitMQ 3.6.9 on Windows when upgrading from any older version of RabbitMQ to version 3.6.9. The solution as already stated here is to manually set ERLANG_HOME with 'setx -m ERLANG_HOME "C:\Program Files\erl7.3"' before starting the service.
What happens is that the RabbitMQ 3.6.9 installer removes the environment variable ERLANG_HOME from the system while removing the older version of RabbitMQ. Then, when it proceeds to the installation step, it does not put back the ERLANG_HOME variable. Then, the batch files that start up RabbitMQ cannot find Erlang. They try to find Erlang's home directory using "where.exe" but it always fails after an upgrade.
RabbitMQ's installer also does not kill all of the Erlang background processes, causing many of its files to be undeletable due to the Windows "file in use" problem. This leaves behind "files in use" in %APPDATA%\RabbitMQ and "C:\Program Files\RabbitMQ." These processes are "erl.exe," "erlsrv.exe," and "epmd.exe." The RabbitMQ installer should taskkill these processes after shutting down the RabbitMQ Windows service.
RabbitMQ is rather clunky on Windows.
Download Erlang or OTP - Only one Version of OTP should be installed
Download RabbitMQ installer
Install both exe file as Administrator
Set class path for Erlang. (Setting classpath is a bit troublesome, so follow these steps)
Set a new path with name ERLANG_HOME and value C:\Program Files\erl-23.1 (do not copy bin folder here)
Edit System "path" and add %ERLANG_HOME%\bin
Go to Start - Open rabbitmq command promt and run
rabbitmq-plugins enable rabbitmq_management
Navigate to localhost:15672
Use guest/guest to login
Interesting that this worked for you. There is record of a two bugs in Erl5.9.2 that cause an incomplete installation where %ERLANG_HOME%\bin is not installed.
Either of
* Installed 64bit erlang on 32bit machine
* "The program can't start because MSVCR100.dll is missing from your computer."
https://groups.google.com/d/topic/erlang-programming/wGtFLzapiQ0/discussion
Try 5.9.1 or any other version. They also mention making the future versions of the installer alert you if it fails.
I just had the same problem mentioned here. I installed otp_win64_R15B02 on a Windows 7 machine and everything worked perfectly, but I used the same installer on a Windows 2008 server and the bin directory was not created. I then uninstalled otp_win64_R15B02 and downloaded the otp_win64_R15B02_with_MSVCR100_installer_fix and the bin directory was created.
I suspect the reason it worked on my Windows 7 system is that I have Visual Studio installed and the required libraries were already available which allowed the otp_win64_R15B02 installer to work correctly.
Oh, and if you're installing Erlang to run RabbitMQ the RabbitMQ install will succeed with the broken installer but installing otp_win64_R15B02_with_MSVCR100_installer_fix after RabbitMQ will not work, just un-install and re-install RabbitMQ to resolve this.
Just give C:\Program Files\erl10.6\ not C:\Program Files\erl10.6\bin\erl.exe in the environment variable. If you open the server.bat file I came to know the issueenter image description here
I think this is encoding issue on windows.I see a correct value but I write echo %ERLANG_HOME% on console the value come with question mark. These steps fix it.
1.go environment variable window
2.edit ERLANG_HOME item
3.copy the value, open notepad and paste there
4.copy again on notepad and paste to edit window
5.apply and exit window
6.close command line tools and reopen
7.run rabbitmq bat file.
I solved it in a quick and dirty way,without naming path variables
I've opened the bat file and replaced every occurrence of
!ERLANG_HOME!\bin\erl.exe
with hard coded path for example might be diffrent path for you because of diffrent version
C:\Program Files\erl10.3\erts-10.3\bin\erl.exe
and replaced
%RABBITMQ_HOME%\escript\rabbitmq-plugins
with
C:\Program Files\RabbitMQ Server\rabbitmq_server-3.7.14\escript\rabbitmq-plugins
Even I was this problem. The issue was the environment variable ERLANG_HOME=c:\Program Files\erl9.0 which was never existed.
I cross checked the path. The correct path was c:\Program Files\erl9.3.
After correcting the
ERLANG_HOME=c:\Program Files\erl9.3
the problem solved. So, definitely it is a path issue.
In my case, it should be installed erlang using admin role running
If above solutions doesn't work for you then you can try following
Find another compatible version of erlang for your rabbit mq e.g. for rabbit 3.7.x erlang version 20.3.x to 22.0.x all are compatible .
Right click newly downloaded erlang version and from properties select the option to unblock the file .
Run the erlang with admin persssion .
Re run rabbit mq exe
So I installed Ruby On Rails using the Windows Installer.
Now the startup guides says I have to start up an Terminal and run the Rails command to make a project. I don't have a terminal, so how do I execute a Rails command and make a project??
The CMD command line in Windows does not recognize "rails"
I don't think it is an PATH problem, because when I'm in the "Bin" directory, there is "rails.bat" and "rails" with no extension. If I run Rails.bat I get "The filename, directory name, or volume label syntax is incorrect."
I get that message with whatever Argument I pass to it.
It seems to be a bug in the rails.bat file because of double-quotes, like:
#"ruby.exe"" "%~dpn0" %*
Remove the double quotes:
http://sepitfalls.blogspot.com/2008/12/updateing-rubygems-broke-gem-command.html
To get a terminal
Start > Run... or Windows key + R
Type "cmd" and hit enter.
To add a folder to the command line's path
On Windows XP (Vista is similar)
Start > Control Panel > System
Click the "Advanced" tab
Click "Environmental Variables"
Under "System Variables" double click on Path and edit accordingly.
You will need to open a new command line in order to get the updated path to take affect. With XP, I've had to reboot to force it to take affect but it shouldn't be necessary.
The Path variable is a semi-colon seperated list of folders in which the Command Line or "terminal" looks for commands.
You'll probably have to find the rails command yourself. I would try looking for a rails.bat or rails.cmd file.
I think they mean the command window. Try running it from a command line.
I dont know where the Windows Ruby on Rails intaller places its files, but the ultimately solution is that you need to make sure that the "rails" command is is your PATH - which you can view/modify by right-clicking My Computer, selecting Properties, going to the Advanced tab and then clicking on "Environment Variables" and then scrolling down until you see "PATH" and adjusting it accordingly. You probably need to find the directory where the "rails" command lives and append to the end of the existing PATH entry, inserting a ";" before you enter the new path to append it to the existing PATH.
So find where "rails" is and add its directory to your PATH.
You probably have to change your PATH in Windows to point to wherever the rails executable has been installed.
The PATH environment variable is used to determine where Windows looks for stuff; when you type, for instance, 'calc' Windows will hunt through its PATH and eventually find and run C:\Windows\calc.exe. In your case, the PATH doesn't include the directory you need, so Windows isn't searching in that directory for rails.exe when you type "rails."
To fix this, right click on "My Computer" -> "Properties" -> "Advanced" -> "Environment Variables" and then modify the PATH one to include the directory your rails.exe is in.
I recommend using cygwin for Rails development on windows - far too much of the community is using *nix. If you install the development tools package you'll automatically have svn, git and other doo-dads that you'll eventually need relating to various rails plugin installation. If you want to deploy using capistrano the installation is identical to all the instructions you find. Plus other tips and tricks people will reference will work exactly the same for you as it does for them, whereas some things are different for native windows and all the accessory tools have to be installed separately.