I'm currently busy on a new installation of Sylius but the Dutch translation is just 80% complete which results in a few missing strings like 'sylius.report.no_data' and such.
Now I've discovered the Crowdin and already contributed a bit but now I want to update my own installation first.
I've seen that Sylius uses jms/translation-bundle in the composer so I tried to add the WebUI using:
JMSTranslationBundle_ui:
resource: #JMSTranslationBundle/Controller/
type: annotation
prefix: /_trans
But this gives me following error:
Cannot load resource "#JMSTranslationBundle/Controller/". Make sure the "JMSTranslationBundle" bundle is correctly registered and loaded in the application kernel class. If the bundle is registered, make sure the bundle path "#JMSTranslationBundle/Controller/" is not empty.
Registering the bundle again in AppKernel.php is also not working...
Or should I just edit the yml files?
Just make the translations in the yml and clear cache, that would be enough.
So in your app/Resources/translation/messages.nl.yml or src/Acme/Resources/translation/message.nl.yml translate the needed strings eg.:
sylius:
add_to_cart: Your translation
I think that indeed editing them in my messages.nl.yml in the Resources folder will be the way to go if I need them fast.
Related
My Grails (2.4.2) app was created with a bunch of "default/standard" resource bundles:
myapp/
grails-app/
i18n/
messages.properties
messages_fr.properties
I would now like to create my own "custom" resource bundle, that is, define properties in a file outside of these standard messages*.properties files that myapp was created with.
According to the i18n documentation, all bundles need to be prefixed with messages and suffixed .properties. So I added two new props files, one for English and one for French:
myapp/
grails-app/
i18n/
messages.properties
messages_fr.properties
messages_myapp.properties
messages_myapp_fr.properties
For one, I'm not 100% sure I'm interpreting the docs correctly. So if anything about my 2 new props files jumps out at you as being incorrect, please start by letting me know!
Having said that, in all the example from those docs, I don't see where you specify the bundle to use. All of the examples look like this:
<g:message code="fizz.buzz.foo" />
But what if I have a fizz.buzz.foo property defined in both messages_blah.properties and messages_bar.properties?
So I ask: How do I add my own custom resource bundles, and how do I properly refer to them from inside a GSP?
To answer your question you have to understand what Grails (well, Spring really) is doing to accomplish this.
You are on the right path with the multiple files. What you have outlined there matches the documentation and will work.
However, under the covers what is really being done is they are being combined into a single bundle (per language). So there is no need to tell Grails/Spring which bundle to use.
Finally, what happens when the same key is defined multiple times? The first one matched wins. I seem to recall that the order in which the bundles are combined is in file name order, though you should be able to test this pretty quickly.
Hope this helps, and best of luck!
i use one Neos installation for multiple domains with different content.
duplicating the package TYPO3.NeosDemoTypo3Org, removing the node-identifier and doing some replacements brought me nearby everything i need.
But only the first Settings.yaml found in Packages/Sites/ seems to be parsed. All changes to the Settings.yaml found in other packages (Test1 and Test2 in the following example) are ignored.
Packages/Sites/TYPO3.NeosDemoTypo3Org/Configuration/Settings.yaml
TYPO3:
Form:
yamlPersistenceManager:
savePath: 'resource://TYPO3.NeosDemoTypo3Org/Private/Form/'
Packages/Sites/UDF.Test1/Configuration/Settings.yaml
TYPO3:
Form:
yamlPersistenceManager:
savePath: 'resource://UDF.Test1/Private/Form/'
Packages/Sites/UDF.Test2/Configuration/Settings.yaml
TYPO3:
Form:
yamlPersistenceManager:
savePath: 'resource://UDF.Test2/Private/Form/'
When i delete the first Settings.yaml (Packages/Sites/UDF.Test2/Configuration/Settings.yaml), the next Setting.yaml in alphabetical order (Packages/Sites/UDF.Test1/Configuration/Settings.yaml) is used for all 3 site packages. When i also delete this file, the Settings.yaml from UDF.Test2 is used and so on.
would be awesome if somebody can enlighten me. I am new to flow and neos and any help is welcome. RTFM, i know, but as described here i have to believe, that it should work like i did?
alternative way?
is it possible not to set the savePath in the site package configuration but in the common settings ./Packages/Application/TYPO3.Form/Configuration/Settings.yaml
I see a {#package} placeholder in
### BASE ELEMENTS ###
# NAMING: base class for everything is RENDERABLE
'TYPO3.Form:Base':
renderingOptions:
templatePathPattern: 'resource://{#package}/Private/Form/{#type}.html'
but this doesn't work here
TYPO3:
Form:
yamlPersistenceManager:
#savePath: '%FLOW_PATH_DATA%Forms/'
savePath: 'resource://{#package}/Private/Form/'
as you see i am not really experienced with this stuff but i am very motivated.
All Settings.yaml are used, but the settings are merged in order of the package loading.
The loading order of packages again is based on their dependencies.
All three packages probably have the same dependencies so they are loaded one after the other (would need to check with which ordering), so third Settings.yaml is loaded, then second Settings.yaml is loaded and overwrites the third, then the first is loaded and again overwrites the second. Every setting path can only be set once, that's why.
In any case what you are trying to archive probably won't work. This is one of the things we have to fix (site package dependent configuration).
A possible workaround is either using a common package with the form configuration and just set the savePath to this package or using diferent subcontexts (like Production/Domain1 Production/Domain2) and setting this setting different per subcontext, then you could define the subcontext by domain (as the sites are triggered by domain anyway).
I have some config file,they don't need use in everywhere,so i don't want it autoload,can you tell me how to load config file in controller and it can be get in serviceLocator,don't tell me to use zend\config\config, thanks。
First off, it's not advised to ask a question and then directly say that you don't want someone to tell you about XY. What if XY would be the only way?
You could always do something like
$onlyNowConfig = require_once('./config/onlyNowConfig.php');
The current working directory of PHP is the root of your application, as it's set in your public/index.php via the chdir() function.
Other than that, there's no real harm to include the configuration inside your module.config.php. The ModuleManager will check for the existance of the getConfig() function inside your Module class. If it's existant, the Configuration will be loaded. Typically every module has a config that will be loaded. And there's no real speed (dis)advantage of outsourcing 100-200 configuration lines into a separate file. The additional I/O you'd do by only including it on those few actions you need it would actually be higher than the very little time it takes longer to merge the configuration (probably like 1ms total vs. 2-3ms I/O).
I'd advise to just include it in your module.config.php and you'd have it available everywhere via the ServiceLocator, otherwise just include/require the one config file that you need, wherever you are. The include/require parameter would never change, as the working directory of PHP will not change, no matter in what file you are (as long as you don't set it anew via chdir() - which would be highly not recommended).
I am trying to create a setup project for a Windows Service. I've followed the directions at http://support.microsoft.com/kb/816169 to create the setup project with no trouble.
I want to be able to get a value during the installation in order to update the app.config with the user's desired settings. I added a Textboxes (A) dialog to retrieve the values. I set the Edit1Property property to "TIMETORUN", and in my Primary Output action's CustomActionData property I put in the following: /TimeToRun="[TIMETORUN]\". So far so good. Running the setup I can retrieve the TimeToRun value from the Context.Parameters collection without issue.
In order to locate the app.config I need to also pass in the value of the TARGETDIR Windows Installer Property to my custom action. This is where things begin to fall apart. In order to achieve this, the above CustomActionData must be altered like so: /TimeToRun="[TIMETORUN]\" /TargetDir="[TARGETDIR]\". Now when I run the setup I get the following error message:
Error 1001. Exception occurred while initializing the installation.
System.IO.FileNotFoundException: Could not load file or assembly 'file:///C:\Windows\SysWOW64\Files' or one of its dependencies. The system cannot
find the file specified.
If you google this problem you will inevitably find people having tremendous success by simply adding the trailing slash to the /TargetDir="[TARGETDIR]\" portion of the CustomActionData. This unfortunately does not solve my issue.
I tried so many different variations of the CustomActionData string and none of them worked. I tried logging to a file from my overridden Install method to determine where the breakage was, but no log file is created because it's not even getting that far. As the error indicates, the failure is during the Initialization step.
I have a hunch that it could be one of the dependencies that the setup project is trying to load. Perhaps somehow something is being appended to the CustomActionData string and isn't playing well with the TARGETDIR value (which contains spaces, i.e. "C:\Program Files\My Company\Project Name"). Again, this is another hunch that I cannot seem to confirm due to my inability to debug the setup process.
One further thing to mention, and yes it's another hunch, could this be an issue with Setup Projects on 64-bit version of Windows? I'm running Windows 7 Professional.
I'll provide names of the dependencies in case it helps:
Microsoft .NET Framework
Microsoft.SqlServer.DtsMsg.dll
Microsoft.SqlServer.DTSPipelineWrap.dll
Microsoft.SqlServer.DTSRuntimeWrap.dll
Microsoft.SQLServer.ManagedDTS.dll
Microsoft.SqlServer.msxml6_interop.dll
Microsoft.SqlServer.PipelineHost.dll
Microsoft.SqlServer.SqlTDiagM.dll
As you may glean from the dependencies, the Windows Service is scheduling a call to a DTSX package.
Sorry for the long rant. Thanks for any help you can provide.
The answer is so maddeningly simple. If the last argument in the CustomActionData is going to contain spaces and thus you have to surround it with quotes and a trailing slash, you must also have a space following the trailing slash, like this:
/TimeToRun="[TIMETORUN]\" /TargetDir="[TARGETDIR]\ "
The solution and explanation can be found here.
Had a similar issue. In my case, it was odd because my installer had ran successfully once, then I uninstalled my app via Add/Remove Programs successfully, did some coding (did NOT touch my CustomActionData string), and rebuilt my project and setup project. It was when I re-ran my MSI that I got this error.
The coding I had done was to bring in more values of more parameters I had been specifying in my CustomActionData string. That syntax for getting the parameter values (i.e. string filepath = Context.Paramenters["filepath"]), which was in my Installer class, was actually fine, but as I found out, the syntax of the later parameters I was now trying to get from my CustomActionData string had not been correct, from the very beginning. I had failed to add a second quote around one of those parameters, so nothing else could be obtained.
I was using the "Textboxes (A)" and "Textboxes (B)" windows in the User Interface section. A has 1 box, EDITA1, where I get the path to a file, and B has 2 boxes, EDITB1 and EDITB2, for some database parameters. My CustomActionData string looked like this:
/filepath="[EDITA1]" /host="[EDITB1] /port="[EDITB2]"
It should have been:
/filepath="[EDITA1]" /host="[EDITB1]" /port="[EDITB2]"
(closing quote on [EDITB1])
I am using the help-balloons plugin
I would like to use it parametrized. I mean, the messages should come from a properties file. In the documentation appears the following:
<g:helpBalloon code="user.name" suffix=".help"/>
In this last example, the code attribute is used to look up the balloon's title within the message bundle and then the suffix is added to the code (producing user.name.help in our example) as the key to be used for looking up the content of the balloon.
My question is:
Where should be located this properties file (message bundle)?
Can I have one message bundle per controller?
Luis
if you looked at the source code for the help balloon tag, it literally uses the grails interationalization code to render the message if given a key. http://fisheye.codehaus.org/browse/grails-plugins/grails-help-balloons/trunk/grails-app/taglib/HelpBalloonTagLib.groovy?r=45243
check out this page http://www.grails.org/doc/1.0.x/guide/10.%20Internationalization.html it tells you where and how to name the file for message bundles.
as for a message bundle per controller, it doesnt seem like you can (at least not apparent from the documentation). but you can hack it by prefixing the message key by the controller name, and thus use the same message bundle file (message.properties_ but still be able to namespace each message.
Where are the Resource bundles:
There is a directory under grails-app called i18n where all the generated resource files are placed, start looking there and see how they are used in the app.
You may be able to just place multiple message files for your controllers in there for organization, just be careful of reusing keys as I'm not sure how that will be handled off hand.
How to access them:
Maybe this will help I hope:
http://www.nabble.com/Organizing-message-bundles-tt16169280.html#a16169280