I'm just learning the Iphone security out of curiosity. This is completely a beginner question.
I've seen the posts on Stack Overflow,
How do I detect that an iOS app is running on a jailbroken phone?
How to detect that the app is running on a jailbroken device?
Those answers are providing the information on "if the app is running on a jail broken device or not". But I need to check "whether the app is running a JailBreak detection or not." ( Not in the programmer point view, but more of a Pentester point of view ). Are there any tools, methods ?
I'd achieve this by downloading Flex 2. With this tool you can view all of the variables, functions and procedures that are in an app.
Go to the patches tab, press the '+' symbol and locate the app to create a patch for. Then process the app by tapping it - don't worry about adding patch name.
Next, when you're inside the processed app you need to press "Add units". This will allow you to add overrides so that you can change what functions return and such.
Anyway, from here, you need to select a class to look inside. The jailbreak detection functions and variables are always stored in the executable. Tap the app name again at the top of all the classes under the 'executable' tab. Then just search.
Just search for "jailbreak" or "jailbroken" and if the app is running checks then it will return functions and vars related to this. I am yet to see an app that runs this check with a different function name that does not include "jailbreak" or "jailbroken".
If you'd like, I can show you how to override this detection.
I suggest you try the app "highway rider", because that has detection and you can easily see, and override it nice and easy and get the startup warning to go away if you want!
Related
I have just tried to run
meteor run ios
That command emulates my application as an app. But there is just one page that would be interesting to have as an app. Can you control this in some way?
I don't think this is possible. The whole app gets exported regardless of platform, hence the universal/isomorphic apps concept. And in the universal app concept is one that I'm starting to find fault in. That said there is a better middle ground.
We'll call it sudo-universal apps. (probably a horrible name, but whatever :D)
Essentially the concept is that you have 3 codebases, for each device (web/ios/andriod) but share many of the same modules via something like npm, or potentially some other way of sharing code.
Then you can focus on the ui for each device and its strengths and weaknesses, but keep all the important logic you've built.
Check out the following:
https://voice.kadira.io/say-no-to-isomorphic-apps-b7b7c419c634#.3bn5ovts1
https://forums.meteor.com/t/say-no-to-universal-apps/16813/7
Hope this helps!
You can check whether the client code is executed on iOS or not, and change the app accordingly:
if(navigator.userAgent.match(/(iPad|iPhone|iPod)/g)) {
// Disable the links, and redirect to which page you want
}
But Justin's answer is great, a new platform usually needs more than just some tweaks. A quickly developed app has very low value for the user.
I require my app to Scan barcode automatically , i have the barcodes, i have the app required, how can i make the App read physical bar codes using automation in appium,
In manual i can scan the code by pointing out the camera to an bar code.
I dont know how to do it while executing an test suite.
i got idea of placing Mobile device on an Stand, tripod and placing barcode in front of it.
But the problem is we can test only one barcode. i want to run for about 100-200 barcodes ans see app performance does not decrease, can any one suggest some ways?
This is a very interesting case. If you really want to test your app scanning the bar codes through camera then I think instead of looking for a solution through appium you have to look for a solution to exactly match your manual process.
You can click scan button using appium(I assume) - for example you can write a script to click on this button every 10 seconds.
Challenge is to point the camera to the next barcode as soon as first scan is complete. Possible solutions- I believe that all the bar codes can be captured in a file in a pc. Copy these bar code images in a ppt or using any other program so that these images can automatically displayed one by one.
Put your device in front of this pc as you are already planning to use tripod stand etc. Focus them on screen(may be first time you might need to do all these adjustments). Run your script. Do some trial runs. Synchronize the process with correct time outs. I think this should be feasible though really not the best way to automate this scenario.
I haven't tested it, but this blog post can be your answer http://www.mobileqazone.com/profiles/blogs/simulating-camera-in-android-emulator. If not, you can try bypass it by creating API to upload an image to your server instead of reading it from the camera. I think the impact on your QA will not change dramatically (besides, it's very easy and fast to check that part manually)
We do have an app that scans plenty of items such as bar codes plus tracking the dimensions of objects through the camera.
I read the idea of synchronizing images into a slideshow which is absolutely hilarious. The way I do it, is by using my own node server app with websockets that will toggle images through http requests. When this app is hosted in a laptop/ipad positioned exactly in front of the AUT, the test will have full control on which barcode to be shown at particular time frame.
No synchronization required at all and does the job.
It is a modified version of https://github.com/JangoSteve/websockets-demo
I'm looking to make an app be able to print out a stick on name tag based on some fields that the user has filled out. The catch is that I don't want the user to have to interact with any sort of system print dialog, I just want it to go straight to the printer and print out after they submit.
The other catch here is that this will most likely be run on an iPad, so I will need to try to send this print job over the air either on wifi, somehow to a computer that is usb connected to the printer or over airprint if I can find one that is small enough and supports the right paper.
I've seen some solutions here and there that require the app to run on windows, or to be connected to the printer some how.
I'm not sure if this feat is possible with this setup, but the most important part is being able to print in the background, if the iPad is going to hinder that, there is a case we can make to our client for getting a small, cheap, windows 8 touch tablet instead of an iPad since I know it has a few more capabilities in this area as it seems through my research.
It doesn't matter what version of ruby or rails it's in and I don't care if it's 2 steps or 200, if the user experience is there, I can make a case for the increased work load needed to make something work.
I'm not a very experienced rails developer, but this project is my first big project that is simple enough that I can tackle it. If more information about how their name tag info is being collected I can shed some light on that as well but I don't think it matters. Whatever I'm printing I need the experience to be the above.
Have a look here: http://support.vendhq.com/hc/en-us/articles/201378390-Enable-kiosk-silent-printing-for-Google-Chrome-on-Windows-Video- under 2) Kiosk printing for Google Chrome
Basically this is using Chrome's Kiosk printing mode. So you would have to get a PC for it to work.
The "print dialog" will pop up shortly but then automatically disappear the the document will print.
As nice as debuggers have gotten these days, sometimes the best way of finding out what is going on in an app is still ye olde NSLog. Doing this is easy when you're tethered to your computer; Xcode helpfully pops up the Log Viewer panel and there you go. Not so easy to do when you're away from your desk, as you sometimes have to be when testing an app (for example, when you are testing CoreLocation functionality). Sure you can pop open Xcode and check the Console section of the Device Organizer as soon as you get back from a testing run, but then you have to wait, and by the time you can get back to view the logs you forgot what was going wrong with your app; also odds are that by the time you are able to do this, the log messages you are looking for have scrolled off into oblivion.
Is there any way of checking the console logs on the device itself? I'm guessing the answer is "no, unless you jailbreak" (IIRC there are at least one or two terminal apps in jailbreak-land that I could use to do this sort of thing). Unfortunately jailbreaking is not an option for me.
Alternatively, is there some sort of Objective-C framework or library or whatnot that handles log collection and on-device displaying? Ideally this would come in the form of a drop-in replacement for NSLog, whereby I could simply do a search-and-replace and change all occurrences of NSLog to SomeFancyPantsLoggingTool or whatever and be done with it.
A good example of the kind of functionality I am looking for can be found in the podcast client Downcast. If you tap the "More" tab, then tap on the version number string at the bottom of the screen, a new view slides up that contains a scrollable view of accumulated log messages. It even has an easy way of mailing said logs to a support e-mail address.
Take a look at LibComponentLogging which you can configure to output logging at different levels and to different destinations.
There is a file for the SysLog. You can simply open it and read from it. The file is at /var/log/syslog. If the file does not exist there are instructions on how to set it up here.
I have a simple problem statement, to invoke my application when multiple key pressed in blackberry device.
For example, I have the "Capture It" application which takes screenshot with key-combinations. How do we achieve such implementations. Any way to handle global key press event handling like how we invoke PhoneListener for incoming calls handling?
As Richard says in this stack overflow answer, you can't implement a KeyListener from the background, because that would be a huge security risk. Applications could then log your keystrokes, and steal your password.
I don't have CaptureIt, but it looks to me like it works two ways:
first, it adds a BlackBerry menu option, to launch it. That's completely different from allowing the app to start from any key combination. That technique (adding your app into the BB menu) is definitely supported.
it looks like a lot of people setup CaptureIt to run when they press their device's Convenience Key. That is a special key, that you can program to start any app on the device, through Options -> Screen / Keyboard.
But, I don't think you can do exactly what you're asking.