Display link to code in Qt creator output pane - hyperlink

When running QTest in Qt Creator with terminal setting disabled, the output pane display links to the test line failing, ie:
FAIL! : MidiTest::testMTCWriter() Compared values are not the same
Actual (tcCount): 1
Expected (2) : 2
Loc: [../../Joker/tests/AutoTest/MidiTest.cpp(271)]
Is it possible to make such link? For example I configured doxygen as an external tool and I'd like to produce the same output for documentation errors.

Related

Jenkins PyLint Warnings tool parses log files but reports 'found 0 issues'

I have setup Jenkins to run pylint on all python source files and all the log files are generated (apparently correctly) into a sub-directory as follows:
Source\pylint_logs\pylint1.log, pylint2.log, ..., pylint75.log
I have included a --msg-template definition based on the instructions on my Jenkins Configure page: Post-build Actions->Record compiler warnings and static analysis results->Static Analysis Tools. The template is shown as:
msg-template={path}:{line}: [{msg_id}, {obj}] {msg} ({symbol})
An example of one of the log files being generated by Jenkins/pylint is as follows:
************* Module FigureView
myapp\Views\FigureView.py:1: [C0103, ] Module name "FigureView" doesn't conform to snake_case naming style (invalid-name)
myapp\Views\FigureView.py:30: [C0103, FigureView.__init__] Attribute name "ax" doesn't conform to snake_case naming style (invalid-name)
------------------------------------------------------------------
Your code has been rated at 8.57/10 (previous run: 8.57/10, +0.00)
For the PyLint Report File Pattern, I have: Source/pylint_logs/pylint*.log
It appears that PyLint Warnings is parsing the files because the console output looks like this:
[PyLint] Searching for all files in 'D:\Jenkins\workspace\PROJECT' that match the pattern 'Source/pylint_logs/pylint*.log'
[PyLint] -> found 75 files
[PyLint] Successfully parsed file D:\Jenkins\workspace\PROJECT\Source\pylint_logs\pylint1.log
[PyLint] -> found 0 issues (skipped 0 duplicates)
[PyLint] Successfully parsed file D:\Jenkins\workspace\PROJECT\Source\pylint_logs\pylint10.log
[PyLint] -> found 0 issues (skipped 0 duplicates)
This repeats for all 75 files, even though there are plenty of issues in the log files.
What is odd, is that when I was first prototyping the use of Jenkins on this project, I set it up to just run pylint on a single file. I ran across another StackOverflow post that showed a msg-template that allowed me to get it working (unable to get pylint output to populate the violations graph). I even got the graph to show up for the PyLint Warnings Trend. I used the following definition per the post:
msg-template={path}:{line}: [{msg_id}({symbol}), {obj}] {msg}
Note that this format is slightly different from the one recommended by my Jenkins page (shown earlier). Even though this worked for a single file, neither template now seems to work for multiple files, or else there is something other than the template causing the problem. My graph has flat-lined, and I always get 0 issues reported.
I have had trouble finding useful documentation on the Jenkins PyLint Warnings tool. Does anyone have any ideas or pointers to documentation I can research further? Thanks much!

Ensure pass output-format parameter in pylint command. Example:
pylint --exit-zero --output-format=parseable module1 module2 > pylint.report

you have to set the Pylint's option --message-template in .pylintrc as
msg-template={path}: {line}: [{msg_id} ({symbol}), {obj}] {msg}
output-format=text

How do I command the Rascal Shell not to truncate my output if it's quite long

This seems like a pretty basic question to me, but I don't seem to be able to find the answer anywhere. I need to get the full output of a command in the Rascal shell, however, Rascal seems to truncate long outputs automatically. Is there any way to tell the shell to always show the full output for a given command.
Example:
rascal>calculateCodeDuplication("smallsql0.21_src")
list[list[loc]]: [
[
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1310,26,<34,0>,<34,26>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1494,56,<43,1>,<43,57>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1558,49,<46,1>,<48,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1616,44,<51,1>,<53,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1665,57,<55,1>,<57,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1731,51,<59,1>,<61,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1791,57,<63,1>,<66,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1853,65,<68,1>,<71,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1927,61,<74,1>,<77,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1993,56,<79,1>,<82,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2055,50,<84,1>,<86,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2114,54,<88,1>,<90,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2177,42,<92,1>,<94,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2248,7,<96,24>,<96,31>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2225,136,<96,1>,<101,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2390,8,<103,24>,<103,32>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2367,153,<103,1>,<107,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2526,54,<109,1>,<111,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2586,51,<113,1>,<115,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2671,16,<118,27>,<118,43>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2645,78,<118,1>,<120,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2731,49,<123,1>,<125,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2789,48,<128,1>,<130,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2846,48,<133,1>,<135,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2902,46,<138,1>,<140,2>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(2955,72,<143,1>,<143,73>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(3118,19,<149,43>,<149,62>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(3041,227,<146,4>,<152,5>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(1340,1931,<36,0>,<153,1>),
|java+compilationUnit:///src/smallsql/database/NoFromResult.java|(0,3273,<1,0>,<153,3>),
|java+compilationUnit:///src/smallsql/database/ExpressionFunctionLog.java|(1305,26,<33,0>,<33,26>),
|java+compilationUnit:///src/smallsql/database/ExpressionFunctionLog.java|(1418,51,<38,4>,<38,55>),
|java+compilationUnit:///src/smallsql/database/ExpressionFunctionLog.java|(1477,123,<40,4>,<43,5>),
|java+compilationUnit:///src/smallsql/database/ExpressionFunctionLog.java|(1337,266,<36,0>,<44,1>),
|java+compilationUnit:///src/smallsql/database/ExpressionFunctionLog.java|(0,1603,<1,0>,<44,1>),
|java+compilationUnit:///src/smallsql/junit/TestDBMetaData.java|(1298,23,<33,0>,<33,23>),
|java+compilationUnit:///src/smallsql/junit/TestDBMetaData.java|(1325,18,<35,...
(note that the console outputs cuts off in the middle of the line with ...)

There are a number of ways. Here are the two I use most frequently:
use iprintln or println from the IO module. The former does indentation which is nice for complex outputs. example: import IO; iprintln(calculateCodeDuplication("smallsql0.21_src")); The nice thing about this is that in the terminal values of loc type are hyperlinks
open an editor for the value using the util::ValueUI module (only in Eclipse), for example: import util::ValueUI; text(calculateCodeDuplication("smallsql0.21_src")); This will pop up an editor with the indented output value (nice to search in using CTRL+F, but the loc is not a hyperlink. Would love to have a contribution in that direction :-))
Caveat for the first one is that scrolling up and down in the Eclipse terminal is very slow on Mac's, and not really fast on Windows either.

How to generate documentation of robot file using sphinx?

I have a robot file (calc_check.robot) in which each test case has separate documentation.
*** Settings ***
Documentation
... The test cases are designed to test the calculator .
Library ../../Library/AddNumbers
*** Test Cases ***
Calc_check_test Testcase01_a
[Documentation]
... Verify that two numbers are added or not
[Tags] add calculator
${addition}= Add numbers 10 20
Calc_check_test Testcase01_b
[Documentation]
... Verify that two numbers are added or not with negative sign
[Tags] add calculator
${addition}= Add numbers 10 -20
When i try to generate documentation for that robot file using the rst file (call_check.rst) i'm getting complete test case along with documentation as well, but i need only "[Documentation]" part only.
calc_check
======================================
.. robot-settings::
:source:/Users/sphinx/calc_check.robot
.. robot-tests::
:source:/Users/sphinx/calc_check.robot
I want documentation (i.e., only [Documentation] part of test case) from two test cases excluding the test case code.
Please tell me how to generate only the documentation part of it.

Robot provides documentation generation libraries called libdoc:
https://robot-framework.readthedocs.io/en/2.9.2/_modules/robot/libdoc.html
Problem is that it generates only for libraries and resources files (those without ***Testcase*** part).
If you need to generate docs from test suites, I would recommand to temporary change TestSuite into Resource file (change section to Keywords) and run libdoc for such file:
python -m robot.libdoc <path to res/lib> <list/show>

Running F# xUnit Fact from TestDriven.NET reporting "It looks like you're trying to execute an xUnit.net unit test."

I am trying to run xUnit tests (from an F# module, if it makes any difference) using TestDriven.NET, but whatever I do I get this error:
It looks like you're trying to execute an xUnit.net unit test.
For xUnit 1.5 or above (recommended):
Please ensure that the directory containing your 'xunit.dll' reference also contains xUnit's
test runner files ('xunit.dll.tdnet', 'xunit.runner.tdnet.dll' etc.)
For earlier versions:
You need to install support for TestDriven.Net using xUnit's 'xunit.installer.exe' application.
You can find xUnit.net downloads and support here:
http://www.codeplex.com/xunit
I tried following the suggestions, i.e. I copied the files
xunit.dll.tdnet
xunit.extensions.dll
xunit.gui.clr4.exe
xunit.runner.tdnet.dll
xunit.runner.utility.dll
xunit.runner.utility.xml
xunit.xml
to the folder with xunit.dll and I ran xunit.installer.exe. How can I get it to work?

I just figured out that I forgot to make the test a function in F# (so it was just a value). The error message can't be more misleading though!

You have two problems:
your Fact is broken:-
If you hover over the
please work
bit, you'll see something like: unit -> int
For a Fact to be picked up by an xUnit runner, it needs to yield `unit (void).
Hence, one key thing to get right first is to not return anything. In other words, replace your 123 with () (or an Assertion).
You can guard against this by putting a :unit stipulation on the test:-
[<Fact>]
let ``please work`` () : unit = 123
This will force a compilation error.
TestDriven.NET is reporting it cannot find the xunit.tdnet modules
It's critical to get step 1 right first. Then retry and the problem should be gone
If it remains...
Either try the VS-based runner which should work as long as it's installed and xunit.dll is getting to your output dir or look at the docs for your version of TD.NET for detailed troubleshooting notes (exec summary is if the .tdnet file was in your out dir or you undo and redo the xunit.installer from the folder containing the packages it should just work, esp if you are on latest)

Using pfccomp or pint to run Pascal-FC programs

I'm using the Pascal FC implementation for Windows Vista found on http://www-users.cs.york.ac.uk/burns/pf.html
I'm trying to run the dining philophers problem found on the link but I don't get how to make the compiler work.
Screenshot

In the screen shot, the program appears to be waiting for you to enter the name of the file to use for the compiler output. Enter a file name.
Better yet, use the pfc.bat command and let it choose the output names for you. The batch file will also run the program automatically after it has been compiled. At the command prompt, run the command like this:
C:\pascalfc-vista> pfc philchan.pas

Resources